Product Description
Key Features
• Universal spider mounting system
• Internal cable management
• No tool on-site adjustment
• Unique ball joint assembly to adjust for roll, pitch and yaw
The InterFit Projector Lift is without doubt the most comprehensive model line-up for any projector lift in the AV world.
This commercial grade bracketing system has excellent internal cable management facilities, no tool required for on-site adjustment, cut-down pole length on-site capacity and a build quality that is second to none in the AV industry.
The standard spider arms can achieve projector coverage of 160mm from centre-point (320mm Diameter)
Specifications
TOTAL HEIGHT (mm) |
COLOUR | MAX LOAD (kg) |
WIDTH (mm) |
DEPTH (mm) |
HEIGHT (mm) |
120 | White | 30.0 | 320 | 320 | 120 |
120 | Black | 30.0 | 320 | 320 | 120 |
300 | White | 30.0 | 320 | 320 | 300 |
300 | Black | 30.0 | 320 | 320 | 300 |
600 | White | 30.0 | 320 | 320 | 600 |
600 | Black | 30.0 | 320 | 320 | 600 |
900 | White | 30.0 | 320 | 320 | 900 |
900 | Black | 30.0 | 320 | 320 | 900 |
1200 | White | 30.0 | 320 | 320 | 1200 |
1200 | Black | 30.0 | 320 | 320 | 1200 |
1500 | White | 30.0 | 320 | 320 | 1500 |
1500 | Black | 30.0 | 320 | 320 | 1500 |
1800 | White | 30.0 | 320 | 320 | 1800 |
1800 | Black | 30.0 | 320 | 320 | 1800 |
2100 | White | 30.0 | 320 | 320 | 2100 |
2100 | Black | 30.0 | 320 | 320 | 2100 |
2400 | White | 30.0 | 320 | 320 | 2400 |
2400 | Black | 30.0 | 320 | 320 | 2400 |
Optional Accessories
- Extra long spider arms
- These extra long arms give 220mm from Centre-point (440mm Diameter) for those extra big projectors.
Call to order
|
![]() |
|
1. Mid Pold Trim Kit Allows for the bracket pole to be run through the ceiling material and fixed to a suitable structure above the ceiling line, and provides for a neat trim cover of the cut hole, held in place securely by grommet screws. |
2. Cut Down Collar This bracket system is designed to be cut down to the required pole length on-site, and then the system simply screws back together after the pole has been trimmed. But if you are not able to perform a neat right-angle cut on-site, you can use the deeper cut-down collar which will cover unsightly cutting and square up the pole in relation to the back plate. |
|
![]() |
![]() |
|
3. Top Ball Joint Got a sloping cathedral ceiling? Well, use this top ball joint to fit to the ceiling (up to 30 degrees adjustment) and adjust the pole and bracket to the appropriate vertical plane. |
4. Vertical Surface Mount Bracket This bracket can be used with the standard bracket or the top ball joint assembly to fix to a vertical plane, such as an overhead beam. |
|
![]() |
![]() |
|
5. 50mm Truss Mount Base Plate Optional base plate to suit InterFit Projector Bracket Range, allows projector bracket to be mounted to a 50mm truss with M8 U Bolts. |
6. Equipment Tray Equipment tray to suit InterFit Projector Bracket Range 350mm wide x 290mm deep x 50mm High and Max load rating 2kg. Tray clamps onto the pole of the Projector bracket. Cannot be used with a 142000A Flush mount projector bracket. |
|
![]() |
![]() |
|
7. Square Base Plate Optional base plate to suit InterFit Projector Bracket Range, base plate is 300mm square and 250mm centre points. |
8. 450mm Base Plate Optional base plate to suit InterFit Projector Bracket Range, base plate is 490mm long x 90mm wide and mounting holes are 450mm x 50mm from centre point. |
|
![]() |
||
9. Adjustable Base Plate Optional base plate to suit InterFit projector bracket range, allows bracket to be rotated + or – 90 degrees for raked ceiling or sidewall installation. |
10. 600mm x 600mm Ceiling Tile To Support Projector Pole
11. I-Beam Mounting Plate for Interfit Projector Brackets |