Product Description
Key Features
• DSC technology enables extension of content up to 4K/60 8-bit to 100m
• PIR input allows automatic room triggering depending on occupancy
• Dual output via HDBaseT and mirrored HDMI
• Automatic or manual switching between 2 HDMI, VGA and USB-C inputs
• Automatic or manual CEC triggering of connected display through HDMI or HDBaseT output
• USB-Type B Host connection for USB extension in KVM application when used with a compatible Class C HDBT receiver
4-Input 4K60 DSC HDBaseT Switcher with USB
Utilizing the best in HDBaseT technology, the SW-740-TX harnesses the power of the Class C specification to deliver 5-play functionality over 100m/328ft of Cat6 cable. 4K/UHD video, Ethernet, Control & Power (PoH) can be sent to a remote display location via a compatible receiver whilst USB2.0 device data can be fed back via the USB host or USB-C ports to a connected source.
The SW-740-TX has 4 switchable source inputs: 2 HDMIs supporting 18Gbps video up to 2160p 8-bit RGB/4:4:4 thanks to DSC compression, VGA, and USB-C supporting not only 4K/30 video, but device data from the connected receiver and device charging; the stereo audio input can be assigned to the VGA source or sent separately to the receiver.
- Automatic or manual switching of 4 connected sources (VGA, 2 HDMI & USB-C) with assignable USB host connection
- Extended functions from USB-C port allow alt-mode for AV & USB host connectivity and device charging up to 3A over a single cable
- VESA recognized DSC compression technology enables extension of content up to 4K/60 8-bit to 100m/328ft
- Powerful output scaling matches video transmission to displays connected via HDBaseT & mirrored HDMI
- Includes input for separate analog audio device independent of HDMI signal for transmission to receiver
- PIR input allows automatic room triggering depending on occupancy
- USB-Type B Host connection for USB extension in KVM application when used with a compatible Class C HDBT receiver (RX-700 recommended)
- Intuitive Web UI for management, setup and maintenance with HTTPS encryption (Telnet over TLS and SSH available in future update)
- Automatic or manual CEC triggering of connected display through HDMI or HDBaseT output.
2160P 4:4:4
The two available HDMI inputs support full 4K 18Gbps bandwidth transmissions, making this presentation switcher ready for any source you connect. The USB-C input supports alt-mode, meaning that a single cable supports, 4K video transmission and two-way data communication.
SCALING
Featuring built-in scaling at the switcher, the HDMI and HDBaseT output will automatically scale depending on the connected screen’s capability. Connect a 4K screen to the HDBaseT output and use the HDMI output to connect a 1080p confidence monitor without affecting the source input.
DEVICE CHARGING
Through the available USB-C input, connect you device and forget the need to worry about your battery. The SW-740-TX supports up to an incredible 20V charging, so whether you plug in your smartphone or laptop, you’ll get charged while you present.
HDBT
Using the best of HDBaseT 2.0 technology, the SW-740-TX is a full 5 Play solution. With DSC technology, USB passthrough, ethernet, control and Power over HDBaseT, this switcher is the ultimate presentation solution.
Specifications
AUDIO AND VIDEO |
||||
Inputs | 1x VGA In: 15-pin VGA 1x USB-C 2x HDMI In: 19-pin type A 1x Audio In: 3.5mm (1/8in) TRS Stereo |
|||
Outputs | 1x HDMI Out: 19-pin type A 1x Audio Out: 3.5mm (1/8in) TRS Stereo 1x HDBT Out: 8-pin RJ-45 Female |
|||
Output Video Encoding | HDBaseT™ Class C | |||
Encoding Data Rate | 9.2Gbps | |||
End to End Latency | 10μs (micro seconds) | |||
Audio Formats | 2ch and multichannel LPCM | |||
Video Resolutions (Max) | Video Resolutions 1920x1080p @60Hz 8bit 1920x1080p @60Hz 16bit 3840x2160p @60Hz 8bit 4:4:4 4096x2160p @60Hz 8bit 4:4:4 |
HDMI 15m/49ft 15m/49ft 7m/23ft 3m/10ft |
Cat6 100m/328ft 100m/328ft 100m/328ft 100m/328ft |
Cat6a/7 100m/328ft 100m/328ft 100m/328ft 100m/328ft |
Supported Standards | DCI | RGB | |||
Maximum Pixel Clock | 600MHz | |||
COMMUNICATION AND CONTROL |
||||
HDMI | HDMI | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included) | |||
HDBaseT™ | HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB | SERIAL | |||
RS-232 | 1x 4-pin Phoenix (Control) | |||
Ethernet | 1x 8-pin RJ-45 female | Bidirectional over HDBaseT™ | |||
IR | 1x 4-pin Phoenix (Pass-through) | |||
USB | 1x USB-C: USB 3.1 1x USB Host: USB-B Data Rate: 190Mbps |
|||
CEC | Auto, Manual Display Power through HDMI & HDBT Output | |||
OTHER | PIR Sensor: 1x 4-pin Phoenix Contact Input: 1x 5-pin Phoenix Tally Output: 1x 5-pin Phoenix |
|||
POWER |
||||
Power Supply | 24V DC 6.66A | |||
Max Power Consumption | Standard: 45W | With USB Charging: 110W | |||
USB-C | Max. 20V charging (65W) | |||
ENVIRONMENTAL |
||||
Operating Temperature | 0 ~ +45°C (32 ~ +113°F), 10% ~ 90%, non-condensing | |||
Storage Temperature | -20 ~ +70°C (32 ~ +113°F), 10% ~ 90%, non-condensing | |||
Maximum BTU | Standard: 153.5 | With USB Charging: 375.3 | |||
Rack Units | Wall Box | <1U | |||
Height With | Without Feet | 30mm/1.18in | |||
Width With | Without Brackets | 240mm/9.44in | |||
Depth With | Without Handles | 200.2mm/7.88in | |||
Weight | 1.34Kg | 2.96lbs | |||
REGULATORY |
||||
Safety and Emission | CE | FCC | RoHS | EAC | RCM |
What's In The Box
- 1x Presentation switcher
- 1x 24V 5A DC Power Supply
- 2x 5-pin terminal blocks
- 3x 4-pin terminal blocks
- 2x Mounting brackets
- 1x Quickstart Guide