Product Description
Key Features
• Stunning visually lossless 4K UHD video with HDR over 1GbE / IP networks
• Auto-switching inputs between HDMI and VGA + Audio
• Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
• Up to 16x16 video walls with image scaling, bezel compensation and rotation
• Image scaling - use a mix of 4K & 1080p displays throughout an installation
• Powerful audio/control matrix functionality - route audio/control separately from video to any decoder
NetworkHD™ 400 Series In-Wall 4K AV over IP JPEG 2000 Encoder
The NHD-400-TX-IW streaming encoder offers stunning 4K HDR video, multichannel audio support and 4K/2K scaling to seamlessly handle mixed resolution HDMI or VGA sources for matrix and video wall functionality. Featuring incredibly low latency, the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.
The NHD-400TX-IW JPEG 2000 encoder is intended for use with 400 Series JPEG 2000 decoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.
- Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
- Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE/IP networks
- Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
- Auto-switching inputs between HDMI and VGA + Audio
- Multi-channel audio including DTS:X & Dolby Atmos™ supported over HDMI
- Image scaling with 400 Series decoders – use a mix of 4K & 1080p displays throughout an installation
- Easy network set-up using standard Layer 2 or Layer 3 managed switches
- Hugely scalable I/O, utilizing multicast technology
- Live video unicast preview streams for use with NetworkHD Touch™ or a custom control UI
- Powerful audio/control matrix functionality – route audio / control separately from video to any decoder
- CEC One-Touch Play & Standby, IR or RS-232 control of connected devices using 400 Series decoder
- 400 Series supports up to 16×16 video walls with image scaling, bezel compensation and rotation
- 400 Series supports custom “No Source” idle image upload for branded down time
- Support all SD, HD and UHD video formats – including interlaced content
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
- Batch firmware update and batch settings functions offers a massive reduction on installation times
- Custom EDID management with import/export
- HDCP 2.2 Compliant
- IEEE 802.3af PoE compliant PD
- Includes optional DC power adapter and decorative bezel
4K UHD AND HDR SUPPORT
Delivering visually lossless 4K UHD content with HDR and HDCP 2.2 support the 400 Series ensures compatibility with the latest UHD video sources, while a built-in scaler at the decoder ensures hassle-free mixing of the latest 4K displays and 1080p screens within an installation.
CUSTOM VIDEO WALL STYLES
Supporting traditional video walls, as well as customizable mosaic styles, perfect for building captivating & creative digital signage. JPEG2000 encoding ensuring distribution integrity and video latency of less than a single frame makes the 400 Series ideal for live environments.
POWERFUL VIDEO PROCESSING
Dynamic video processing seamlessly converts and matches source video content from each decoder to connected displays, removing video resolution and timing incompatibilities that might otherwise exist for reliable and easily manageable multi-display systems.
POWERFUL ROUTING ENGINE
The 400 Series boasts discrete audio stream routing, ensuring true signal breakaway can maximize system flexibility. CEC and RS-232 display control signals can also be generated at the 400 Series decoder, removing the requirement for external equipment.
Specifications
AUDIO AND VIDEO |
||
Inputs | 1x HDMI In: 19-pin HDMI Type A 1x VGA In: 15-pin DE-15 Female 1x Audio In: 3.5mm (1/8in) TRS Stereo (VGA only) |
|
Outputs | 1x 8-pin RJ-45 (Transmission to RX) | |
Audio Formats | 2ch LPCM | Multichannel: LPCM Up to 7.1 and Up to DTS:X and Dolby Atmos (HDMI Only) | |
Ouput Video Decoding | JPEG 2000 | |
Decoding Data Rate | Max: 850Mb/s | |
End to End Latency (Max) | 1 video frame latency (pass-through mode) 16ms @60fps | 2 video frames latency (scaler/VW mode) 33ms @60fps | |
Video Resolutions (Max) | HDMI Input 1280x720p @50/59.94/60Hz 12bit 4:4:4/RGB 1920x1080i @29.97/30Hz 12bit 4:4:4/RGB 1920x1080p @23.98/24/25/29.97/30/50/59.94/60Hz 12bit 4:4:4/RGB 3840x2160p @23.98/24/25/29.97/30Hz 10/12bit 4:2:2/4:2:0 HDR10 HLG 3840x2160p @23.98/24/25/29.97/30Hz 8bit 4:4:4/RGB 3840x2160p @50/59.94/60Hz 8bit 4:2:0 720x480p @59.94/60Hz 12bit 4:4:4/RGB 720x576p @50Hz 12bit 4:4:4/RGB 60fps Progressive 4:4:4/RGB: 640×480 | 800×600 | 1024×768 | 1280×800 | 1280×960 | 1280×1024 | 1360×768 | 1366×768 | 1400×1050 | 1440×900 | 1600×1200 | 1680×1050 | 1920×1200 VGA Input RGB @60Hz Progressive: 640×480 | 800×600 | 1024×768 | 1280×720 | 1280×768 | 1280×800 | 1280×960 | 1280×1024 | 1360×768 | 1366×768 | 1400×1050 | 1440×900 | 1600×900 | 1600×1200 | 1680×1250 | 1920×1080 | 1920×1200 |
Passthrough mode: Output at RX matches input at TX except for: 1) YUV 4:2:0 converted to 8bit RGB 2) For resolutions above 1920×1200 at 50/60Hz framerate is halvedScaler mode: User-selectable scaled output 1) All formats converted to 8bit RGB 2) Up to 3840x2160p @30Hz |
Supported Standards | HDR10 | HLG | BT.2020 | BT.709 | 3D Video | |
3D | HDMI 1.4b 3D: TnB, SbS, F.P | |
Maximum Pixel Clock | 300MHz | |
COMMUNICATION AND CONTROL |
||
HDMI | HDCP 2.2 | |
Ethernet | 1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af) | |
USB | 1x USB Host: USB Type B | |
RS-232 | 1x RS-232: 3.5mm (1/8in) TRS Stereo | 2 Way | |
POWER |
||
Power Supply | 12V DC | |
PoE | IEEE 802.3af | (15.4W at PSE) | |
Max Power Consumption | 5.7W (with PSU) | |
ENVIRONMENTAL |
||
Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing |
|
StorageTemperature | -4°F to ~ 158°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing |
|
Maximum BTU | 19.45 BTU/hr | |
DIMENSIONS & WEIGHT |
||
Rack Units/Wall Box | 2-gang US J-Box | |
Height | 107.2mm/4.2in (without decorative plate) | |
Width | 91mm/3.6in (without decorative plate) | |
Depth | 45.5mm/1.8in (without decorative plate) | |
Weight | 0.37kg/0.81lbs | |
REGULATORY |
||
Safety and Emission | CE | FCC | RCM | RoHS |
What's In The Box
- 1x AVoIP In-Wall Encoder
- 1x 12V DC Power Supply
- 1x 2-Pin Terminal Block
- 1x 3.5mm Stereo TRS Plug to 3-pin Terminal Block RS-232 Adapter
- 1x White Decorative Plate with 4 Screws
- 1x Quickstart Guide