Product Description
 |
 |
 |
Key Features
• 2-Way Low impedance loudspeaker
• 6.5" Polypropylene cone Woofer, 1" Tweeter
• 16 Ohm Impedance; Dust resistant (IP50 rating)
• 70V transformer power taps on 20 - 10 - 5 - 2.5 watts
• 100V transformer power taps on 20 - 10 - 5 watts
• High quality ABS plastic housing & Paintable steel grille
6.5" Two-Way, Thin Edge Ceiling Loudspeaker
The CM20DT 6.5” two-way built-in loudspeaker can be used in 16 ohms or 70/100 volt modes. The high-quality 70/100 volt transformer is equipped with an easy tapping sticker with clear colour indication. The transformer colours are aligned with the cables connecting the Apart Quick Fit connector, a handy installer connector via push terminal.
In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. The paintable thin edge grille makes CM20DT the ultimate loudspeaker for design interior integration.
Specifications
| outside diameter | 210 mm | depth | 80 mm | |
| cutout | 186 mm | loudspeaker system | 2-way | |
| woofer size | 6.5 inch | woofer cone material | polypropylene | |
| tweeter size | 1 inch | mounting system | 3 screws | |
| 100V transformer power taps | 20 - 10 - 5 watts | 70V transformer power taps | 20 - 10 - 5 - 2.5 watts | |
| impedance | 16 ohms | low impedance dynamic power | 60 watts | |
| SPL 1W/1m | 86 dB | max SPL 1m | 104 dB | |
| frequency response | 60 - 20K Hz | main construction material | ABS plastic | |
| grille main material | steel | IP rating | 50 | |
| applicable low impedance | yes | applicable in 100V | yes | |
| Vertical dispersion angle 1000 Hz | 180° | Net weight product | 1.24 kg |
Optional Accessory
Pack Square Grille pack of 12 (BIA-SQGR)
- Optional square grille with integrated safety wire
