Product Description
 |
 |
 |
 |
Key Features
• Dual Coil loudspeaker system
• 600 watts low impedence dynamic power
• SPL Max Peak: 133dB
• Woofer: 2 x 10" Long Xmax, Rocker up 4 Ohm, Rocker down 4-16 Ohm
• Frequency response 45 - 150 Hz
The SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns... where often "dance level" music is required.
This subwoofer has two band pass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. The bass reproduction is a lot more “punchy” and “faster” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” and 18” subwoofers and the results were astonishing in favour of the SUB2400!
SUB2400 can be driven in 4 ohms or 16 ohms mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohms mode is advised. Less power is lost and the bass response will be a lot better. The 16 ohms mode also allows you to use multiple cabinets.
Available in black color (SUB2400) and white color (SUB2400-W)
Other Details
| Height: | 700 mm |
| Depth: | 450 mm |
| Woofer size: | 2 x 10 inch |
| Impedance: | 4 or 16 ohms |
| SPL 1W/1m: | 99 dB |
| Frequency response: | 45 - 150 Hz |
| IP rating: | 20 |
| Applicable in 100V: | No |
| width: | 352 mm |
| Loudspeaker system: | Dual coil |
| Woofer cone material: | Paper |
| Low impedance dynamic power: | 600 watts |
| Max SPL 1m: | 133 dB |
| main construction material: | Plywood |
| Applicable low impedance: | Yes |
