Product Description
 |
 |
 |
 |
Key Features
• 4 Stereo output zones
• Inputs: 3 mono mic/line + 4 stereo line inputs
• Phantom power supply option on MIC 1 & 2
• 20 - 30k Hz Frequency response
• Control via front panel, RS232, IR remote or ZONE4R remote control panels
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone (MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial. On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.
On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
Specifications
| 19" (483 mm wide) rack mounting | yes |
| depth (build in) | 196 mm |
| power supply | 115 - 230 VAC |
| zone outputs | 4 stereo |
| output level unbalanced (dB) | 0 |
| signal to noise level SNR (dB) | >90 |
| crosstalk (dB) | >75 |
| MIC level control | yes |
| source selection per zone | yes |
| MIC inputs unbalanced | 0 |
| Phantom power voltage | 18 volts |
| selectable input dynamics | no |
| line input balanced | 0 |
| S/PDIF input | no |
| RS232 (serial communication port) | yes |
| priority input contact | yes |
| chime | no |
| priority output contact | no |
| frequency response (in Hz) | 20 - 30 k |
| applicable low impedance | yes |
| height- rack units (1U=44 mm) | 1 U |
| depth (incl front) | 205 mm |
| power consumption (max) | 25 watts |
| output level balanced (dB) | 0 |
| S/PDIF output | no |
| total harmonic distortion TBH (%) | <0.02 |
| music level control | yes |
| VCA level control | no |
| MIC inputs balanced | 3 |
| inputs with Phantom power | 2 |
| noise gate on MIC | no |
| selectable output dynamics | no |
| line input unbalanced | 4 stereo |
| tone control | yes |
| wall panel controls | yes |
| maximum qty paging Mics | 4 |
| emergency input | yes |
| priority levels | 2 |
| applicable in 100V | yes |
| Net weight product (kg) | 2.75 |
