Product Description
 |
 |
 |
 |
 |
 |
Key Features
• 4K/UHD capability, HDCP 2.2 compliant
• AV, Ethernet, power, and control over HDBaseT
• Remote-Powered receiver, Field updatable firmware
• Multi-Channel audio compliant, Full 3D pass through
• Transmits HDMI signals up to 100m @1080p or 4K/UHD over category cable
4K/UHD HDMI Over 100M HDBaseT TX/RX with Control & PoE
The Atlona AT-UHD-EX-100CE-KIT is an HDBaseT™ transmitter/receiver kit for HDMI transmission up to 328 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. This extender kit transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. Additionally, the kit extends Ethernet, RS-232, and 12 volt-based IR control commands.
The kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
Configured and Managed By AMS
The AT-UHD-EX-100CE-KIT also supports the Atlona Management System (AMS), a powerful network software platform that integrates product configuration, management and updating. Specially designed for IP-controllable Atlona Products, the Atlona Management System reduces installation time and enables remote monitoring and support. To learn more please visit AT-SW-AMS.
4K/UHD Transmission with Ethernet, Control, and PoE
The AT-UHD-EX-100CE-KIT provides integrator-friendly features including: IEEE standards based PoE transmission for safety and compatibility; compliant with HDCP 2.2 to meet the latest copy protection requirements; an integrator-friendly form factor with rear panel HDBaseT, HDMI, control and power connections; a rack- mountable form factor that allows for four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.
The AT-UHD-EX-100CE-KIT is ideal for use in residential or commercial point to point applications that require greater HDBaseT signal transmission distance than the AT-UHD-EX- 70C can support. As a transmitter/receiver pair, the kit can be used with the H2H matrix switcher and HDDA distribution amplifier series and third party control systems for long distance AV signal and control extension with PoE capability. On its own, the AT-UHD-EX-100CE-RX receiver is compatible with the UHD-PRO3 Series, AT-UHD-CLSO-601 and AT-UHD-SW-52ED.
Features
4K/UHD capability
- Compatible with Ultra High Definition sources and displays
- Future proofs AV systems in preparation for technology improvements, 4K/UHD streaming services and playback devices
HDCP 2.2 compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
Remote-powered receiver
- Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
- Saves time and integration costs
Extended distance HDMI extension
- Transmits HDMI signals up to 328 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
AV, Ethernet, power, and control over HDBaseT
- Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
- Eliminates multiple cable runs between source, control system, router, and display
Rear panel I/O connectors
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
Multi-channel audio compliant
- Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
- Allows any multi-channel audio stream to be used within a professional audio system
Field updatable firmware
- Front panel USB port provides an easy means for kit upgrades
- Ensures long term system return on investment
Front panel Power and Link status LEDs
- LED indicators provide power and HDBaseT link status information
- Provides easy setup and troubleshooting
Power Chaining
- Single power supply provides ample power for up to three Atlona Extender Kits
- Four Atlona Extender Kits may be powered using an optional power supply, p/n AT-PSU-48V1.25A
- Reduces clutter from multiple power supplies in equipment racks
Low-profile, 1 inch (2.5 cm) high quarter rack-width enclosure
- Easy installation into racks and confined spaces behind displays
- Keeps devices out-of-sight when placed in public spaces
Included accessories
- User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets
Award-winning 10 year limited product warranty
- Ensures long-term product reliability and performance in residential and commercial systems
- Specify, purchase, and install with confidence
Specifications
Resolution |
||
| Video | 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i | |
| VESA | 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 | |
| Colorspace | YCbCr, RGB | |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 | |
| Color Depth | 8-bit, 10-bit, 12-bit | |
Audio |
||
| Formats | PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X | |
| Sample Rate | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | |
| Bit Rate | up to 24-bit | |
Distance |
||
| CAT5e/6 @ 4K | up to 70 meters | up to 230 feet |
| CAT6a/7 @ 4K | up to 100 meters | up to 328 feet |
| CAT5e/6 @ 1080p | up to 100 meters | up to 328 feet |
| HDMI IN/OUT @ 4K | up to 5 meters | up to 15 feet |
| HDMI IN/OUT @ 1080p | up to 10 meters | up to 30 feet |
Signal |
||
| Bandwidth | 10.2 Gbps | |
| CEC | Pass through | |
| HDCP | Supports up to 2.2 | |
Connector |
||
| Firmware | Mini-B USB | |
| HDBaseT | RJ45 (8P8C) | |
| HDMI | Type A | |
| LAN | RJ45 (8P8C), Ethernet pass through | |
| TX-IR | 4-pin captive screw | |
| RX-IR | 5-pin captive screw | |
| RS-232 | 3-pin captive screw | |
| Power | 2-pin, 48V captive screw | |
Temperature |
||
| Operating | 0°C to 50°C | 32°F to 122°F |
| Storage | -20°C to 60°C | -4°F to 140°F |
| Humidity | 20 to 90% non-condensing | |
Power |
||
| Consumption | 12W | |
| Supply | Input: AC100~240V 50/60Hz Output: DC 48V/0.83A |
|
Dimension |
||
| H x W x D | 25 x 109 x 89 (mm) | 0.98 x 4.29 x 3.5 (inch) |
| w/ears | 27 x 119 x 89 (mm) | 1.06 x 4.69 x 3.5 (inch) |
Weight |
||
| Unit | 0.39kg | 0.86lbs |
Certification |
||
| Power Supply | CE, FCC, RoHS, cULus, RCM, CCC | |
| Product | CE, FCC | |
* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only
What's In The Box
Kit
- 1 x Atlona 4K UHD HDMI Over 100m HDBaseT with Control & PoE Transmitter
- 1 x Atlona 4K UHD HDMI Over 100m HDBaseT with Control & PoE Receiver
- 1 x 48V DC desktop power supply
- 5 x Female captive screw connector (2 pin (x1): power, 3 pin (x2): RS-232, and 5 pin (x2): IR)
- 2 x Pair of wall/table mount ears
- 2 x Pair of screws for wall/mount ears
- 2 x IR emitter (AT-IR-CS-TX)
- 1 x User Manual
RX
- 2 x Female captive screw connector (3 pin: RS-232 and 5 pin: IR)
- 1 x Pair of wall/table mount ears
- 1 x Pair of screws for wall/mount ears
- 1 x IR emitter (AT-IR-CS-TX)
- 1 x User manual
