Atlona 4K UHD Remote Powered HDMI Over HDBaseT Transmitter With Ethernet, Control & PoE (up to 100m)

Product Description

4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE

The AT-UHD-EX-100CE-TX-PD is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.

The AT-UHD-EX-100CE-TX-PD is compatible with the AT-UHD-EX-100CE-RX-PSE receiver, and both products are available together as a kit. This transmitter is also ideal for Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products.

The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass-through and RS-232 control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-TX-PD is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This device is externally powered via Power over Ethernet, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, including the AT-UHD-CLSO-612ED, AT-UHD-CLSO-840, and AT-UHD-SW-5000ED.

The AT-UHD-EX-100CE-TX-PD transmitter simplifies system design when powered by an Atlona switcher with HDBaseT inputs, reducing cost and complexity by eliminating the need for a power supply. It can also be paired with the AT-UHD-EX-100CE-RX-PSE receiver and AT-HDVS-200-RXscaling receiver, both delivering PoE. Installer-friendly features include a rack-mountable form factor that allows four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.

Applications

This transmitter is ideal for use in applications where:

• HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table
• 4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design

Features

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

• Compatible with Ultra High Definition sources and displays
• Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

• Adheres to latest specification for High-bandwidth Digital Content Protection
• Allows protected content stream to pass between devices

Supports 4K HDR10 @ 24 Hz

• Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Remotely powered via PoE (Power over Ethernet)

• IEEE 802.3af PoE Powered Device (PD)
• Power for transmitter is supplied by receiver over HDBaseT
• Saves time and integration costs

AV, Ethernet, power, and control over HDBaseT

• Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
• Eliminates multiple cable runs between source, control system, router, and display

Extended distance HDMI extension

• Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

Extends RS-232, CEC, and Ethernet control signals*

• Control signals travel over HDBaseT link to device for maximum control system flexibility
• Simplifies integration of source, control system, and display
• * The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.

Rear panel I/O connectors

• Placement of ports on rear panel simplifies wire management
• Saves installation time and eliminates clutter

Multi-channel audio compliant

• Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
• Allows any multi-channel audio stream to be used within a professional audio system

Field-updatable firmware

• Front panel USB port provides an easy means for device updates
• Ensures long-term system return on investment

Front panel Power and Link status LEDs

• LED indicators provide power and HDBaseT link status information
• Provides easy setup and troubleshooting

Low-profile, 1 inch (25 mm) high quarter rack-width enclosure

• Easy installation into racks and confined spaces
• Keeps devices out-of-sight when placed in public spaces

Included accessories

• User guide, mounting brackets

Award-winning 10 year limited product warranty

• Ensures long-term product reliability and performance in residential and commercial systems
• Specify, purchase, and install with confidence