Atlona HDMI and VGA to HDBaseT Switcher Transmitter Wallplate (Up to 70m)

Product Description

Two-Input Wall Plate Switcher for HDMI and VGA Inputs with HDBaseT Output

The Atlona AT-HDVS-150-TX-WP features an HDMI input plus VGA input with 3.5mm audio connector and a two-gang, US two-gang wall plate. An optional face plate without buttons is also available (AT-HDVS-TX-WP-NB). The AT-HDVS-150-TX-WP combines the benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200 video, and control signals can be extended up to 230 feet (70 meters).

The switcher enables auto display on/off, auto-switching, along with other features. The switcher receives power from the AT-HDVS-150-RX receiver using Power over Ethernet. The AT-HDVS-150-TX-WP fits inside any 40 mm deep two-gang electrical box or mud ring and is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources.

Automatic Display Control

The AT-HDVS-150-TX-WP, when used in combination with the AT-HDVS-150-RX receiver, allows automatic display control using RS-232 signals. When integrated with a display, the AT-HDVS-150-RX forces the display to power on automatically when a laptop is connected to the AT-HDVS-150-TX-WP. At the end of the presentation, when the presenter disconnects the laptop from the transmitter, the AT-HDVS-150-RX forces the display to power off. Ease of presenter interaction with the system and the savings incurred by auto-display shutdown provide a significant return on investment.

• RS-232 – Many displays including projectors, commercial flat panel displays, and some consumer displays can be controlled using the RS-232 signal directly from the switcher. The switcher is able to send commands using RS-232 for automatic display control to compatible displays.

Reliable Auto-Switching

Automatic input selection on the AT-HDVS-150-TX-WP uses the 5 volt, hot plug signal in order to detect and automatically switch to the proper input.

The AT-HDVS-150-TX-WP is ideal for:

• Education environments – The wall plate switcher is placed in furniture or is wall-mounted for use with a laptop and document camera. Auto-switching technology selects the active source input and routes the signal via HDBaseT to the switcher downstream.
• Corporate environments – The wall plate switcher is wall-mounted near a boardroom conference table or furniture-mounted to allow presenters to easily connect to the system. When integrated with a control system, commands can be sent to activate a display from the front panel of the switcher.

Features

US, 2-gang wall plate

• Shallow, 1.5 in (40 mm) deep wall plate simplifies integration with recessed RJ-45 connector
• Attractive alternative to table-top boxes for placement near presenter’s station

2×1 HDBaseT™ switcher

• Features an HDMI input plus VGA input with 3.5mm audio connector
• Allows advanced HDMI display devices to be used with legacy VGA sources

Long distance HDMI extension

• Transmits AV signals up to 230 ft (70m) @ 1080P and 130 ft. (40m) @ 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

Automatic display control 

• Automatically changes projector power state based on active or standby mode of the switcher (in conjunction with the AT-HDVS-150-RX). Control signals are transmitted via RS-232.
• Eliminates the need for a complex control system in small AV systems

Automatic input selection using 5 volt detection

• Selects active input when sources are connected or if there is a change in source power status
• Eliminates need for complex control system in small AV systems

Front panel display on/off control

• Remotely controls display power state; provides alternate ‘Display Mute’ mode
• Eliminates need for manual operation of display or use of IR remote control

Front panel input select button

• Overrides auto-switching when two active sources are present
• Simple manual control allows presenter to maintain control of AV system

Optional “No Button” US faceplate

• AT-HDVS-TX-WP-NB Accessory Blank Face Plate
• Allows input control only from 3rd party switcher
• Allows the presenter to control the meeting