Product Description
 |
 |
 |
 |
Key Features
• IR Receiver designed for Atlona UHD-EX Series extenders
• Uses standard, 12 volt-based system
• Red status LED indication when signal received
• 2m cable length; Self-adhesive backing
• Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors
IR Receiver Cable for PoE Extenders
The AT-IR-CS-RX is an IR Receiver Cable for PoE Extenders using a standard, 12 volt-based system. The 6 ft. (2 m) long, 3 pin cable features striped ends designed for quick connection with captive screw connectors (not included). The IR receiver is designed to be placed where operators are likely to point an IR remote, such as a display or screen area in an AV system. A red LED provides clear indication that the IR emitter is operational.
- IR Receiver designed for Atlona UHD-EX Series extenders
- Uses standard, 12 volt-based system
- Red status LED provides positive indication that the receiver is capturing a signal from the IR remote control
- Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors
- Length: 6.6 ft. (2 m)
- Self-adhesive backing
Specifications
- Frequency range from 30 to 60 kHz
- Distance up to 10m w/no interference on axis
- *Operational distance may vary due to interference from IR radiating sources Ex. Sunlight, CFL, LCD, or Plasma displays
- Reception Angle: +/- 45° off axis
- Dimensions (H x W x D) 10 x 62 x 10 (mm) 0.39 x 2.44 x 0.39 (inch)
- Red status LED indicator for quick verification the IR receiver is picking up the IR remote’s signal
- Power Requirement: 12V DC, 20mA -- Maximum current output: 100mA -- Signal level: 10.8V
