Product Description
 |
 |
 |
 |
 |
 |
Key Features
• Supports HDMI 2.0 and video resolutions up to 4K@60Hz 4:4:4
• HDMI inputs support HDCP 2.2 and the outputs support HDCP1.4
• Supports CEC control to turn the displays on/off and adjust their volume
• Features RCA (L/R) jack and Toslink connector for de-embedded audio
• Supports video resolution down-scaling, the 4K@60Hz input can be automatically degraded to 1080P output for compatibility with 1080P display
This is an ultra thin 2×4 switcher splitter with two HDMI inputs and four HDMI outputs. This switcher splitter supports HDMI video resolutions up to 4K@60Hz 4:4:4, 1080P and multichannel audio. There are multiple built-in EDID settings or it will use the EDID from the display. The switcher will de-embed digital stereo audio to provide an analog audio source for an existing audio system.
Features
- Supports HDMI 2.0 and video resolutions up to 4K@60Hz 4:4:4.
- HDMI inputs support HDCP 2.2 and the outputs support HDCP 1.4.
- Supports video resolution down-scaling, the 4K@60Hz input can be automatically down-scaled to 1080P output for compatibility with a 1080P display.
- 18Gbps high bandwidth.
- Features RCA (L/R) jack and Toslink connector for de-embedded audio.
- Advanced EDID management: multiple presets and user defined options.
- Built-in equalizer for signal enhancement to avoid signal attenuation in transmission.
- Supports CEC control to turn the displays on/off and adjust their volume.
- LED indicators display the operating status.
- Firmware update via Micro-USB port.
Specifications
Model |
2 x 4 HDMI switcher | 2 x 8 HDMI switcher |
Video Input |
||
| Input | (2) HDMI | |
| Input Connector | (2) Female type-A HDMI | |
| HDMI Input Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit | |
| HDMI Standard | 2.0 | |
| HDCP Version | 2.2 | |
| CEC | Supported | |
Video Output |
||
| Output | (4) HDMI | (8) HDMI |
| Output Connector | (4) Female type-A HDMI | (8) Female type-A HDMI |
| HDMI Output Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit | |
| HDMI Standard | 2.0 | |
| CEC | Supported | |
Audio |
||
| De-embedded Output | (1) AUDIO OUT; (1) SPDIF OUT | |
| Output Connector | (1) RCA (L/R) jack; (1) Toslink connector | |
| HDMI Audio Format | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through. | |
| Stereo Analog L/R Audio Format | PCM | |
| Toslink Digital Audio Format | PCM, Dolby Digital, DTS, DTS-HD | |
| Frequency Response | 20Hz ~ 20KHz, ±3dB | |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal | |
| THD+N | <0.05% (-80 dB), 20Hz ~ 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) | |
| SNR | >80dB, 20Hz ~ 20 KHz bandwidth | |
| Crosstalk Isolation | >70dB, 10KHz sine at 0dBFS level (or max level before clipping) | |
| L-R Level Deviation | < 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) | |
| Frequency Response Deviation | <± 0.5 dB 20Hz ~ 20KHz | |
| Output Load Capability | 1K ohm and higher (supports 10x paralleled 10k ohm loads) | |
| Stereo Channel Separation | >70dB@1kHz | |
Control |
||
| Control Part | (5) Control buttons; (1) EDID 3-pin DIP switch;
(1) EDID 4-pin DIP switch; (1) Micro-USB port |
|
General |
||
| Bandwidth | 18Gbps | |
| Operation Temperature | -10℃ ~ +55℃ | |
| Storage Temperature | -25℃ ~ +70℃ | |
| Relative Humility | 10%-90% | |
| Power Supply | Input:100V~240V AC; Output: 12V DC 1A | |
| Power Consumption | 12W(Max) | |
| Dimension (W*H*D) | 232mm x 20mm x 100mm | 324mm x 20mm x 100mm |
| Net Weight | 660g | 900f |
What's In The Box
- 1 x 2x4 / 2x8 Splitter
- 2 x Mounting ears with 4 Screws
- 4 x Rubber Feet
- 1 x Power Adapter (DC 12V 1A)
- 1 x User Manual
