Product Description
 |
 |
 |
 |
 |
 |
 |
Key Features
• SPDIF out on receiver for source audio de-embedding
• 4K/UHD upscaling for HDMI output
• Supports ARC & CEC passthrough
• Bidirectional 12V IR, RS232 and 24V PoC
• Supports HDMI 2.0 and the HDMI video resolution up to 4K@60Hz 4:4:4 HDR
• Extends 4K signals up to distance 40m (1080P up to 70m) over a single CATx cable
This product is a HDMI 2.0 receiver, which is designed to receive 4K video from a transmitter at distance up to 131 feet (40 meters) and 1080P video at distances up to 230 feet (70 meters) over a single CATx cable. It supports audio de-embedded and ARC. It also supports bidirectional IR and RS232 pass-through to control source or display device remotely.
Features
- Supports HDMI 2.0 and the HDMI video resolution up to 4K@60Hz 4:4:4 HDR.
- Extends 4K signals to distances up to 131 feet (40 meters) and 1080P signals to distances up to 230 feet (70 meters) over a single CATx cable.
- Supports video resolution up-scaling, the 1080P input can be automatically upgraded to 4K output.
- SPDIF out on receiver for source audio de-embedding.
- 18Gbps high bandwidth.
- Bidirectional IR, RS232 and 24V PoC.
- Supports ARC.
- Supports CEC pass-through.
- Provides LEDs to indicate the current operating status.
- Firmware upgrade by Micro-USB port.
Specifications
Video |
|
| Input | (1) HDBT |
| Input Connector | (1) RJ45 |
| Input Resolution | Up to 4Kx2K@60Hz 4:2:0 |
| Output | (1) HDMI |
| Output Connector | (1) Type-A female HDMI |
| Output Resolution | Up to 4Kx2K@60Hz 4:4:4 8bit HDR10 |
Audio |
|
| Input | (1) ARC Audio In |
| Input Connector | (1) Toslink Connector |
| Output | (1) Audio Breakout |
| Output Connector | (1) Toslink connector |
| Audio Format | Supports PCM, Dolby Digital, Dolby True-HD, DTS and DTS-HD. |
| Frequency Response | 20Hz – 20KHz, ±3dB |
| Max Output Level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316mV) nominal consumer line level signal |
| THD+N | < 0.05% (-80dB), 20Hz – 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
| SNR | > 85dB, 20Hz-20 kHz bandwidth |
| Crosstalk Isolation | > 70dB, 10KHz sine at 0dBFS level (or max level before clipping) |
| L-R Level Deviation | < 0.3dB, 1KHz sine at 0dBFS level (or max level before clipping) |
| Frequency Response Deviation | < ± 0.5dB 20Hz – 20KHz |
| Output Load Capability | 1KΩ and higher (Supports 10x paralleled 10KΩ loads) |
| Stereo Channel Separation | >70dB@1KHz |
Control |
|
| Control Part | (1) ARC Mode button, (1) FW, (1) 12V IR In, (1) 12V IR Out, (1) RS232 |
| Control Connector | (1) Micro-USB port, (2) 3.5mm jacks, (1) 3-pin terminal block |
General |
|
| Bandwidth | 18Gbps |
| HDMI Standard | 2.0 |
| HDCP Version | 2.2, 1.4 compliant |
| CEC | Pass-through |
| Bidirectional PoC | Supported |
| HDMI 2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 15m, 1080P ≤ 20m |
| Transmission Standard | HDBaseT |
| Transmission Distance | 1080P@60Hz ≤ 230 feet (70 meters), 4K@60Hz ≤ 131 feet (40 meters) |
| Operation Temperature | -5~ +55℃ |
| Storage Temperature | -25 ~ +70℃ |
| Relative Humidity | 10%-90% |
| Power Supply | Input:100V~240V AC; Output:24V DC 1.25A |
| Power Consumption | 12W (Max) |
| Dimension (W*H*D) | 40mm x 19.5mm x 84mm |
| Net Weight | 290g |
What's In The Box
- 1x HDBaseT Receiver
- 2x Mounting Ears with 4 Screws
- 4x Plastic Cushions
- 1x 3-pin Terminal Block
- 1x User Manual
