Product Description
 |
 |
 |
 |
 |
Key Features
• Built-In "Data Window" OLED display
• SFP Fiber Connection for Long Runs
• 1G Maximum Data Rate
• USB/KVM Host support
• Full Exterior Light Control
• RS-232 and IR Direct Routing end point
• HDCP 2.3 (and all earlier versions supported)
• Encapsulated RS-232 over IP serial passthrough
• Protect against direct rain, dust, humidity, Sea/Salt fog, some chemicals & heat
Weatherproofed Video Distribution
Protecting delicate electronics with Sealoc's nano-coating solution creates a virtually invisible, durable, waterproofing protective layer that works primarily with AVPro Edge's own computer boards and components. The nano-coating creates a formidable barrier on circuitry that encapsulates the electronic components, protecting against water, moisture, humidity, dust, salt-air, and corrosion of various types.
AVPro Edge Extender Kit gets the full waterproof treatment from Sealoc
The team at Sealoc does more than coat our extenders and decoders with their magic liquid. They also ensured the chassis were sealed correctly with extensive testing:
- Testing overarching effectiveness of Sealoc's Nano Fluid Treatment.
- Testing on the Receiver units was done as hybrid applications meaning outdoor, covered, and in full direct rain situations.
- Testing for environments with heat, humidity, salt fog, rainfall, and more.
- Rated IP68
The rainfall testing had the most significant impact on the functionality of the units. All control units failed immediately when the water was turned on.
A significant portion of protection is a coating made from a nanofluid developed explicitly for electronic boards by Sealoc. Ensure you have the tools to extend the life of installations in harsher conditions.
Note: *Not compatible with V2 systems
Application
ANYWHERE YOU NEED TO PROTECT FROM THE ELEMENTS
- Installs near the Ocean
- Installs in dusty locations
- Very humid areas like pools, gym's and fountains
- Hard to get to locations that very dirty
- Any Outdoor Video Zone
Full Feature Set
-
HDMI 2.0
-
18Gbps Bandwidth Support
-
HDCP 2.3 (and all earlier versions supported)
-
1G Maximum Data Rate
-
Uses any standard category cable (CAT 5E or better )
-
SFP Fiber Connection for Long Runs
-
Built-In “Data Window” OLED display
-
USB/KVM device support
-
Full Exterior Light Control (for discreet installs)
-
RS-232 and IR Direct Routing end point
-
Encapsulated RS-232 over IP serial passthrough
Specifications
What's In The Box
- AC-MXNET-1G-D-SEA (Decoder/Receiver)
- 1 x IR Emitter
- 1 x IR Receiver
- 2 x Mounting Brackets
- 4 x Screws for Mounting Brackets
- 2 x 3-Pin Terminal Blocks
