Product Description
 |
 |
 |
 |
Key Features
• 6.5" Treated paper cone Woofer, 1" Soft dome Tweeter
• Low profile, less than 6" (151mm) total depth
• 8-ohm nominal impedance allows for daisy chaining
• 60W (240W peak) power handling; 130° Conical dispersion angle
• Directly integrates with Tesira® AMP-450BP (PoE+ amplifier)
• Optimised for speech reproduction in conferencing applications
• Supports both standard category cables and traditional speaker wiring for audio connections
The Desono C-IC6
The Desono C-IC6 is a low-profile, two-way passive coaxial loudspeaker optimized for speech reproduction in conferencing applications. Designed with the installer in mind, the C-IC6 loudspeaker supports audio connections via either standard category cable or traditional speaker cable. They can be blind-mounted from below the ceiling, and feature a magnetic grille for easy toolless installation and removal. The grille plates are available in white, black, or red, or can be painted to match the room decor.
The C-IC6 also directly integrates with the Tesira AMP-450BP — a four-channel “backpack” PoE+ amplifier — which reduces wiring requirements and installation time. The Desono C-IC6 loudspeakers are an ideal choice for any conferencing space that demands superior speech reproduction.
- Low profile passive loudspeaker, less than 6 inches (155 mm) total depth
- Supports both CAT cables and standard speaker wiring
- Designed to be integrated with the AMP-450BP (backpack PoE+ amplifier)
- 8-ohm nominal impedance allows for daisy chaining
- Bridge-mounted 1-inch soft dome tweeter
- 2-way 6.5" treated paper woofer, mechanically isolated and independent of tweeter
- 130-degree coverage optimized for low ceilings
- 60W with a peak power of 120W
Specifications
| Operating Mode | Passive with DSP |
| Operating Environment | Indoor in climate-controlled environments |
| Operating Range | 60 Hz to 20 kHz (-10 dB) |
| Nominal Beamwidth (H x V) | 130°, conical |
| Transducers | LF 1 x 6.5" (165 mm) treated paper cone HF 1 x 1" (25 mm) soft dome |
| Continuous Power Handling @ Nominal Impedance | 60W @ 8 ohms (240W peak) |
| Nominal Sensitivity @ 1m | 87 dB |
| Nominal Maximum SPL @ 1m | 105 dB |
| Required Accessories | None |
| Recommended Amplifiers | 60W - 120W @ 8 ohms; Tesira AMP-450BP |
PHYSICAL |
|
| Input Connection | One 4-pole Euroblock connector for two pair of parallel connections [up to 16AWG]; Two RJ-45 connectors |
| Mounting Provisions | 4 mounting clamps with 1.4 inch (36 mm) grip range |
| Compliance | ETL listed to comply with UL 1480A and UL 2043; Certified to CSA C22.2#62368-1; Suitable for use in air handling spaces per NFPA 70 and NFPA 90 |
| Dimensions H x Dia. | 5.9" x 10.9" (151 mm x 276 mm) |
| Cutout Diameter | 9.75” (248 mm) |
| Weight | 7.8 lbs (3.5 kg) |
| Finish | Refer to the Technical Drawings (page 3) |
Options |
|
| Accessories | BPAK backpack adapter kit C-IC6-GK-12PK grille kits (black, white, or red) |
