Product Description
 |
 |
 |
 |
Key Features
• 10" Treated paper cone Woofer, 1.4" Voice coil compression Tweeter
• Uniform coverage from coaxially mounted HF/LF drivers
• 100° x 100° dispersion angle
• 5-position switch selects 70 V/100 V taps or low impedance bypass
• Exceptional audio clarity with small footprint and attractive styling
• Suits small venues or used in distributed applications without subwoofers
EX-S10
The Desono EX-S10, the largest member of the EX Series, 10 inch two-way surface mount loudspeaker provides excellent musicality with deep LF extension. It’s perfectly suited as the front-of-house in small venues or used in distributed applications without subwoofers.
Designed for easy and fast installation, our innovative, patented ClickMount™ brackets provide installers with two distinct mounting options. The ClickMount pan-tilt bracket provides indexed aiming control and allows for mounting EX Series quickly in either vertical or horizontal orientation without moving the bracket position. The ClickMount U-Bracket is also available for low profile mounting or exterior use and includes the ClickPlug with an integrated gland nut for weather-resistant applications. Both brackets are theft and tamper resistant.
- Exceptional audio clarity with small footprint and attractive styling
- Uniform coverage from coaxially mounted HF/LF drivers
- 5-position switch selects 70V/100V taps or low impedance bypass
- Utilizes innovative ClickMount pan-tilt and U-brackets for mounting
- ETL listed to comply with UL 1480A, CSA 62368-1, CE marked, and RoHS compliant
- EN54-24 certified
Specifications
| Operating Mode | Passive with selectable low-impedance or 70 V/100 V operation | ||
| Operating Environment | Indoor / Outdoor | ||
| Operating Range2 | 48 Hz to 20 kHz (-10 dB) | ||
| Nominal Beamwidth (H x V) | 100° x 100° | ||
| Transducers |
LF 1 x 10" (250 mm) treated paper cone |
||
| Sensitivity3 |
@1m |
91 dB (2.83 V) |
91 dB (1 W, 8 Ω) |
|
Nominal Continuous Power Handling4 |
49 V (300 W, 8 Ω Nominal Impedance) | ||
|
Nominal Maximum SPL5 (Processed) |
@1m |
Continuous |
Peak |
| Rated Continuous Voltage6 | 45.7 V (33 dBV) | ||
|
Rated Maximum SPL7 (Processed) |
@ 1 m |
Continuous |
Peak |
| Transformer | 70 V: 120 W, 60 W, 30 W, 15 W; 100 V: 120 W, 60 W, 30 W | ||
| Crossover / Protection | 1.48 kHz crossover, driver protection circuitry | ||
| Required Accessories | 48 Hz, 18 dB / oct. Butterworth high pass filter; DSP preset | ||
| Recommended Amplifiers | 300 W - 600 W, 8 Ω (49 V - 69 V) | ||
PHYSICAL |
|||
| Input Connection |
Lever-actuated wire clamping 4-position terminal block with pass-through |
||
| Controls | Wattage / low impedance selector switch | ||
| Mounting Provisions | ClickMount pan-tilt bracket or ClickMount U-Bracket | ||
| Compliance |
ETL listed to comply with UL 1480A, |
||
| Environmental Rating |
IP54 per IEC 60529, IEC 60068-2-5 (Solar Radiation), |
||
| Dimensions H x W x D | 529 mm x 310 mm x 312 mm [20.8" x 12.2" x 12.3"] | ||
| Weight | 15.2 kg [33.43 lbs] | ||
| Finish | Refer to the Technical Drawings (pages 3-4) | ||
|
Models |
EX-S10-CM [-B,-W] - loudspeaker with large ClickMount pan-tilt bracket |
||
Options |
|||
| Accessories |
CMX-LG [-B,-W] - Large ClickMount Pan-tilt Bracket Kit |
||
