Product Description
 |
 |
 |
 |
Key Features
• 2 channels; 600 Watts total output all channels driven
• Compact design for versatile placement
• Each channel can drive up to 600 watts (twice the symmetric power)
• Includes Tesira processing blocks for applicable Biamp loudspeakers
• Flexible output channel design supporting 100 V, 70 V, 8 ohm or 4 ohm per channel
• Includes manual per-channel configuration: Mode switches for Lo/Hi-Z, high-pass filter, and gain trim options. Gain trim2 can boost both the gain and the power by up to 3dB
A 600.2
The Voltera A 600.2 is a compact two-channel half-rack power amplifier with a total output power of 600 watts. The amplifier channels can be individually selected to drive 300 watts per channel into 4 ohm, 8 ohm, 70 V, or 100 V. Power sharing is also supported, allowing up to 600 watts to be delivered by any channel.
- 600 Watts total output
- Flexible output channel design supporting 100 V, 70 V, 8 ohm or 4 ohm per channel
- Each channel can drive up to 600 watts (twice the symmetric power)
- Using the included mounting accessories, the halfwidth design allows single or tandem mounting in 1 RU or mounting in a variety of other locations, including under tables, on walls, behind screens/monitors, in ceilings, and on shelves in credenzas1
- Default 4 dBu input sensitivity no matter what load means that it is easy to drive with any source
- Includes manual per-channel configuration: mode switches for Lo/Hi-Z, high-pass filter, and gain trim options. Gain trim2 can boost both the gain and the power by up to 3dB
- The internal fans required by the high-power capability are thermally controlled and support whisper mode for normal operation
- Includes Tesira processing blocks for applicable Biamp loudspeakers
- Auto standby mode
- CE marked, UL listed, and RoHS compliant
- Covered by Biamp Systems five-year warranty
Specifications
Output section
- Total output all channels driven: 600 W
- Number of channels: 2
- Maximum output voltage: 147 Vpk
- Maximum output current: 20 Apk
- Power per channel all channels driven
- 100/70V: 300 W
- 8 ohm: 300 W
- 4 ohm: 300 W
- Max power per channel using power sharing1
- 100/70V: 600 W
- 8 ohm: 600 W
- 4 ohm: 600 W
- THD+N (20 - 20000 Hz for 1 W into 8 ohm): <0.5%
- THD+N (1 kHz, 1 dB below clip): <0.008%
- Frequency response (20 - 20000 Hz, 8 ohm, unweighted): +/-0.5 dB
- Signal to Noise ratio (8 ohm): >103 dBA
- Channel separation (crosstalk at 1 kHz): >75 dB
- Input impedance (balanced): 8 kohm
- Input sensitivity (for all Mode options)2: +4 dBu (1.23 Vrms)
- Max input level: +24 dBu
- Gain for 70 / 100 V3: 35.2 / 38.2 dB
- Gain for 8 ohm3: 32 dB
- Gain for 4 ohm3: 29 dB
- Front panel indicators
- temp: Amplifier channel and power supply temperature
- limit: Shows if the limiters are engaged
- signal: Signal status per channel
- mute: Shows if the mute input is engaged
- power: Shows if it is on / standby
- Rear panel controls/indicators
- Signal level indicator: Signal level and limiter action
- Mode switch / ch. (4 Ω / 8 Ω / 70 V / 100 V): Defines the gain and the limiter thresholds
- High pass filter: 70 Hz 12 dB/octave (on/off)
- Gain trim (default 0 dB): In addition to reducing the gain down to -infinity, it can boost the gain and power by up to 3 dB
- Control/monitoring IO:
- Mute all channels (input)
- Health (output)
- Sleep mode status (output)
- Sleep mode (input)
- Included accessories:
- Rack solution for single/tandem 19" 1 RU mount
- Brackets for mounting under table/on wall/under ceiling
- Overall dimensions
- HxWxD: 1.7 x 8.7 x 11.4 inches (44 x 220 x 290 mm)
- Weight: 6.1 lbs (2.7 kg)
- Cooling: Variable speed fans, front to back airflow
- Environmental
- Operating temperature: 32-104°F (0-40°C)
- Relative humidity: 0-95% non-condensing
- Power: 100-240 VAC, 50/60 Hz
- Standby: <1 W (designed to meet Energy Star requirements)
1 : Available on any channel if the trim is set to +3 dB
2 : With the gain trim set at 0 to +3 dB
3 : With the gain trim set at 0 dB
