Product Description
 |
 |
 |
 |
Key Features
• 12" woofer in each subwoofer unit (total 2 drivers)
• High power four channel class D power amplifier module
• Dual balanced 3 pin XLR outputs
• Built in effect processing
• Built-in Bluetooth module 5.0 for streaming from your favourite devices
• Built in DSP processor allows multiple presets to be stored and recalled
• Speaker column is housed in an aluminium alloy cabinet for added durability
This 1000W PA column speaker system is a plug and play active speaker system ideal for live shows, parties, bands, musicians or anywhere foreground sound reinforcement is required. The system reproduces accurate and natural sound in various environments. Each system is supplied with an active 12" subwoofer unit, passive subwoofer unit and two column speakers which fit into the recessed top hat connection on the top of the subwoofer. This creates a low visual profile, allowing patrons easy viewing while still providing plenty of volume for most small to medium venues.
It offers a high power, active speaker system paired with advanced digital signal processing and integrated mixer for simple connections on the go - no amplifiers or cables to run, just connect your sources and switch it on. Once the gig has finished its easy to pack away with in-built case handles for carrying.
Features
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- 12" driver in each subwoofer unit.
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth 5.0 module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
Specifications
Amplifier
- Type: 2 in 4 out 4 channel amplifier with DSP
- Power: Full range channels 2 x 200W / 4 ohms. Subwoofer channels 2 x 300W / 8 ohms.
- Amplifier input sensitivity (@ 8 ohms): 1.04V / 2.56dBu
- DSP input sensitivity (@ 8 ohms): 1.96V / 8.06dBu
- Input impedance: 20K ohms balanced
- Slew rate: 50V/us @ 8 ohms, input filter bypassed
- Damping factor: >500@1KHz
- Frequency response: 20 -20KHz (±0.5dB) @ 1W, 8 ohms
- Background noise: -80dBV (20 -20KHz, A weighted)
- S/N ratio: >110 dB (20 -20KHz, A weighted)
- List all isolation: >80dB @1KHz
- THD +N: <0.08% from 1W to half power (typically <0.05%)
- IMD: <0.2% from 1W to half power (typically <0.05%)
Column Speaker
- Frequency response: 100Hz-18KHz
- Coverage: (Nominal -6 dB) H120° V40°
- Impedance: 6 ohm
- Rated power: 2 x 200W
- Sensitivity: 95dB (1W/1m)
- Max SPL: 121dB
- Dimensions: 735 x 94.5 x 117mm
- Weight: 6.2kg
Subwoofer
- Frequency response: 40Hz-250Hz
- Driver: 12" x 1 (per subwoofer unit)
- Impedance: 8 ohm
- Rated power: 2 x 300W
- Sensitivity: 99dB (1W/1m)
- Max SPL: 126dB
- Protection: Opto- limiter, Subsonic filter
- Power supply: 100 - 240 VAC, 50 - 60 Hz.
- Power socket: Powercon
- Dimensions: 356 x 480 x 530mm
- Weight: 22kg
* Specifications are subject to change without notice.
