Product Description
 |
 |
 |
 |
 |
Key Features
• Small form factor, can be unobtrusively located near analog devices
• +24VDC Phantom power
• Dual power options (DC or PoE)
• Three input gain settings for common line & microphone sources
• Integrated discovery, routing, configuration & control using ControlSpace Designer software
• Separate analog output gains to accommodate both consumer and professional line-level requirements
The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system.
The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer.
Applications
- Hotel ballrooms
- Conference/meeting centers
- Conference rooms
- Sports facilities
- Convention centers
- Religious and worship facilities
- Retrofit applications using existing networking cable
Compatible Products
Specifications
Audio Inputs
- Input Channels: Two (2) analog, balanced microphone/line level
- Connectors: Two (2) 3.81 mm Euroblock, 3-pin
- Phantom Power: +24VDC, software selectable per input
- Gain Settings: 0 / +25 / +40 dB, software selectable
- Input Impedance: > 1.8 kΩ at any gain setting
- Equivalent Input Noise: -115 dBu (at +40 dB gain)
- Maximum Input Level: +12 dBu (at 0 dB gain)
- Output Channels: Two (2) analog, balanced line-level, with automatic muting on loss of Dante signal
- Connectors: Two (2) 3.81 mm Euroblock, 3-pin
- Output Gain: 0 / +10 dB, software selectable
- Output Noise: < –90 dBu @ 0 dB gain
- Maximum Output Level: +12 dBu
- Output Impedance: 200 ohms (100 ohms unbalanced)
- ControlSpace® DesignerTM software v4.2 or later
- Digital Conversion: 48 kHz / 24-bit
- System THD: < 0.01 % (at any gain, input signal 3 dB below maximum)
- PoE Class: Class 0 802.3af PoE PD compliant
- Certifications: FCC Part 15 Class A, CE (EN 55022 Class A)
- Dimensions: 1.06" H x 6.45" W x 3.45" D (27 mm x 164 mm x 88 mm)
- Operating Temperature: 32 °F – 104 °F (0 °C – 40 °C)
