Product Description
Key Features
• 8 x KT88, 2 x 12AU7EH, 2 x 12BH7EH & 1 x 6SN7 Tubes
• 2 x 80W RMS Ultralinear / 2 x 50W RMS Triode Power output
• Designed and tuned in Germany
• Can run KT-88 or EL34 Tubes via switch
• All handmade Silver point to point wiring
• On-board Bias meter for easy adjustments
• Line 1, Line 2, Line 3, Pre-In & Sub Out terminals
Our powerhouse: The Cayin CS-100A with a KT-88 assembly for the output stage. He brings it to 80 watts per channel in the class AB ultra-linear mode and 2 x 45 watts in triode mode – a tight performance for a tube amplifier. In addition to the power tubes KT 88 are used for voltage amplification 6SN7, for phase inversion and voltage gain 12AU7EH. The output tubes are controlled via a driver stage with 12BH7EH. Also on the remaining components was not saved. The remote controllable volume control comes from Alps, the capacitors are optimized for audio applications, the film resistances have the lowest tolerances. There is also a high-quality toroidal transformer in the power supply.
Specifications
Frequency range | 8 Hz - 75 kHz (-3dB) |
Harmonic distortion (THD) | 1% (1 kHz) |
Signal to Noise Ratio | 92 dB |
input impedance | 100 kΩ |
input sensitivity | 450 mV line input 1300mV pre-in |
Tubes | 6SN7 × 1, 12BH7EH × 2, 12AU7EH × 2, KT88 × 8 |
inputs | Line 1, Line 2, Line 3, Pre-In |
Circuit | Class A / B |
Housing Color | Anthracite Metallic |
Front panel | Silver or black |
Output power (RMS) at 4 and 8 Ω | KT88: 45W + 45W Triode, 80W + 80W Ultralinear |
Maximum power consumption | 480W |
Dimensions (W x D x H) | 420 × 394 × 200mm |
Mass | 30 kg |
Domestic Equipments | Remote control, integrated bias meter |