Product Description
 |
 |
 |
 |
Key Features
• Full 10-bit data pipeline with HDR10 and HLG support
• Four independent outputs up to 1920 x 1200 at 60Hz
• High bandwidth loop-through for daisy-chaining multiple units
• Rotate, scale, crop, mirror and bezel correction processing
• Audio passthrough, configurable to any single or multiple outputs
Superb HDR10 colour clarity
The Datapath Fx4-HDR builds on the success of its award winning Fx4 and x4 predecessors and brings the superb HDR 10-bit colour clarity, 4K60 resolution as well as audio support into the mix.
Creativity made simple
Advancements in digital signage requirements mean that customers demand greater freedom in creating and deploying small, medium and large-scale signage projects.
Fx4 HDR’s advanced hardware processing enables complete flexibility for content mapping across multiple output canvases. Join multiple devices to support larger display areas, whilst maintaining synchronisation across all outputs.
Unparalleled connectivity options
| 3 Input Choices | Network Connectivity | |
| The Fx4 features one HDMI 2.0 input and two HDMI 1.4 inputs. The intuitive UI allows users to determine which input is used. | Dual Ethernet ports allow users to add the device to their networks. Ethernet loop-though support allows connectivity to all devices with a single network connection to the switch. | |
| Genlocked Input | Loop-through | |
| Auto lock to the active input, or use analog black & burst or tri-level house sync via a robust BNC connector. | A dedicated HDMI 2.0 loop-through output allows users to link multiple devices. Specifically designed prevent the loss of resolution, the original capture signal remains unchanged. |
Powered by Wall Designer
Wall Designer allows users to add displays from the ever-expanding database of monitors, visualise their content by adding inputs, backgrounds and adjusting capture regions. Finally, instantly configure all Datapath Fx4-HDR's either via USB or the network ports.
Features
- Infinite creative configurations
- Multiple inputs for flexible connectivity:
- 1 x HDMI 2.0 with HDCP2.2 support 2 x HDMI 1.4 with HDCP1.4 support
- Full 10-bit data pipeline with HDR10 (ST2084) and HLG (Hybrid Log Gamma) support
- Four independent outputs up to 1920 x 1200 at 60Hz
- High bandwidth loop-through for daisy-chaining multiple units
- Audio passthrough, configurable to any single or multiple outputs
- Rotate, scale, crop, mirror and bezel correction processing
- Content region selection for each output with upscaling and downscaling support
- True stand-alone operation: Fx4-HDR can adapt to changes in inputs by adjusting all scale factors
- Network or USB interfaces allow platform independent control (MAC OSX 10.13 & later)
- Pre-load an image for use when signal is not detected
Specifications
| Dimensions | 316x172x42mm (1.86kg) |
| Operating Temperature | 0 - 35°C/ 32 - 96°F |
| Power Requirements | IEC switched and fused mains connectors 100-240V, 50/ 60Hz/ 35W |
| Video Input Connections |
1 x HDMI 2.0 (2160p60 or equivalent up to 616MP/s) |
| Video Output Connections |
4 x HDMI 1.4 (1080p60, 1200p60 or equivalent up to 165MP/s)* |
| Input Surface | 8k x 8k maximum |
| Genlock Input | Analogue black-burst on dedicated BNC connector. or any video input (selectable) |
| Control Interfaces |
Dual 100Base-T Ethernet ports with inbuilt managed switch. USB 2.0 Type B connector (full speed operation) |
| Firmware Support | Updates supported via USB and Ethernet connection |
| Storage | -20 to 70°C |
| Relative Humidity | 5% - 90% non-condensing |
| Warranty | 3 years |
What's in the Box
- The Fx4 Multi Display Controller
- 1 x Mains power cable
- USB 2.0 cable Type A to Type B
- 8 x HDMI Cable Locks
- 2 x rack mount attachments
- 6 x rack mount screws
