Product Description
 |
 |
 |
 |
Key Features
• 8" Woven Fiberglass sandwich cone Woofer
• Nomex Spider, High Temp 1.5" Diameter Voice Coil
• 110 RMS (200W Dynamic) Power consumption
• 35 - 200 Hz Frequency response
• Low-distortion, high-impact bass and easy-to-install sealed backbox
Episode® Passive In-Wall Subwoofer
Our flagship Episode® Passive In-Wall Subwoofer is a culmination of world-class engineering and uncompromising component selection. Each 8” woven fiberglass sandwich woofer features a nomex spider and oversized voice coil for unparalleled accuracy and low-end response. The system is enclosed in an easy-to-install sealed backbox to deliver low-distortion, high-impact bass. It’s perfect for mid- to high-end home theater and two-channel applications.
| Important Note - The ES-SUB-IW-SNGL requires the use of an external amplifier which is sold separately. For more information, refer to the EA-AMP-SUB-1D or the KIT-SUB-IW-SNGL8 kit we've created for easy ordering. |
Backbox ConsiderationsThis subwoofer is designed to use the wall cavity as its backbox. Typical 2x4 construction spaced 16”-on-center will create roughly 3 cubic feet of airspace in an 8’ tall wall cavity – perfect for retrofit subwoofer applications. It is optimized to work in as little as 1 cubic foot of airspace, which is equivalent to a 2.5’ tall wall cavity should you use a fireblock or purlin in new construction. |
||
|
|
|
|
World-Class EngineeringDon’t be fooled by the fact this is an in-wall subwoofer. You see, this little guy features the same woofer found in its dual 8" sibling. It features an 8" Woven Fiberglass Sandwich cone, Nomex Spider and high- temperature voice coil. Optimized for outstanding audio performance, this subwoofer delivers realistic bass with a punch unmatched by the competition. |
Locking GrillThe force created by this woofer was so great our engineering team wasn't able to use a conventional friction-fit grill - so they designed a new one! By adding small bump-outs to the grill and accompanying recesses in the plastic bezel, it stays put even when rocking the house! There's even the nice finishing touch of fiberglass tape for a smooth fit - and to prevent rattles. |
|
 |
|
|
Retrofit-FriendlyNo in-wall subwoofer is easier to install! Just use the supplied template to cut an opening in the drywall, connect speaker wire to the gold-plated spring terminals and zip the dog toggles into place. |
Reinforced BezelTo handle the power of this woofer, our engineers designed a custom bezel with reinforced ribs that won't flex or wobble under pressure. The result is clean, accurate bass! |
|
Specifications
| Frequency Response | 35-200 Hz |
| Color | White |
| Connectors | Spring-Loaded Push Terminals |
| Diameter | 8" |
| Power Consumption | 110W, 200W Dynamic |
| Sold As | Each |
| Weight | 5.95 lb |
| Speaker Grille | Aluminum Micro-Perf Mesh |
| Nominal Impedance | 4 ohm |
| Sensitivity | 85 dB |
| Voice Coil | Nomex Spider, High Temp 1.5" Diameter Voice Coil |
| Woofer | 8" Woven Fiberglass Sandwich Cone |
| Dimensions (WxHxD) | 10" x 10" x 4" |
| Cutout Height | 8.9" |
| Cutout Width | 8.9" |
