Product Description
 |
 |
 |
 |
Key Features
• 6.5" Polypropylene Woofer, 1.2" Oversized voice coil
• 1" Silk dome tweeter with neodymium magnet
• Swing-out dog mounting system
• 65W RMS @ 8 ohm power output
• 7.5W (70V only), 15w, 30w, 60w or 8 ohm bypass
• 70Hz - 19kHz Frequency response; 87dB Sensitivity
Episode® 800 Commercial Series 70-Volt In-Ceiling Speaker with Tile Bridge & 6" Woofer
Get premium sound quality and unparalleled performance with the Episode® 800 Commercial Series 70-Volt In-Ceiling Speaker. Top-notch components, a wide frequency response, two-way design, and dual voltage support for 70V/100V with 8-ohm bypass provides exceptional sound clarity and dynamic highs and lows. And it’s chock-full of installer-friendly features, too! An innovative 3-piece tile bridge, front-mounted tap settings, and all-cardboard packaging make this professional-grade product perfect for your next commercial application. This speaker comes with a modern white, thin-bezel magnetic grille, with black grilles available for purchase. And for the icing on the cake, everything you need for the install ships together. One speaker, one bridge – one box.
Premium ComponentsTop-quality components provide premium sound quality you have to hear to believe. This speaker has a two-way design, polypropylene woofer with rubber surround, silk dome tweeter with neodymium magnet, 1.2” oversized voice coil, and dual voltage support for 70V/100V. Outstanding driver voicing is combined with a 1st order crossover for sound clarity beyond expectations, while a computer-optimized, low-turbulence tube port provides improved low-frequency response. We even included a self-resetting poly switch to protect the tweeter from harsh spikes, like when a microphone is dropped. |
Fast, Easy InstallationYour in-ceiling install will be fast and easy, thanks to the smart design of this 70V/100V speaker. A swing-out dog mounting system, security wire tabs, and clamping mounting cover make it simple to secure. Plus, its mounting cover can clamp a conduit and is held in place by captive screws – so you can loosen them without worrying that they’ll fall out. Screw-down dog ears are reversible for double-thickness sheetrock, and the intuitive box design doubles as an install shelf. A carry loop makes carrying this speaker up the ladder a breeze |
|
 |
 |
|
High-Strength, Thin-Bezel GrilleWe include a white, thin-bezel, high-strength magnetic grille that’s held in place with neo-magnets around the perimeter. Your clients will love the minimalist look of the thin-bezel, and you’ll love how easy the high-strength magnet makes your install. Black grilles are also available for purchase. Black grilles are also available for purchase. |
Innovative Tile Bridge – Ships in the BoxSay goodbye to that big, clunky tile bridge that ships in a huge box and is difficult to position in the ceiling. You can install this ceiling tile bridge tool-free or use the included security screw to key in on a dimple and support the ceiling tile while screwing down the dogs. And of course, we include it in the same box as the speaker…because that just makes sense. |
|
|
|
|
|
Front-Mounted, Tool-Free Tap SettingsTired of fumbling with hard-to-use selector knobs every time you need to adjust a speaker’s tap setting? This product solves the problem with convenient front-mounted 7.5w, 15w, 30w, 60w taps, plus an option for 8-ohm bypass. Using a screwdriver works great for those hard-to-reach installs, but you can also turn the knob with your hand for fast and easy top-of-the-ladder adjustments. |
UL Listed, Plenum RatedThis commercial speaker is UL listed, as well as plenum rated. It’s approved for use above ceilings in air handling and plenum locations – and has passed the stringent standards needed to get the UL stamp of approval. |
|
|
|
||
Smarter PackagingWorking on a commercial jobsite where EPS foam isn’t allowed, or tired of cleaning up huge mounds of trash when the job is over? Our environmentally friendly cardboard packaging cuts down on waste – plus we ship everything you need for the install in one box. |
Specifications
|
Height
|
12.17"
|
|
Woofer
|
6 1/2" Polypropylene
|
|
Tweeter
|
1" Silk Dome
|
|
Power Output
|
65 Watts RMS (@ 8 Ω)
|
|
Nominal Impedance
|
8 Ohms
|
|
Transformer Tap Settings
|
70V: 7.5w, 15w, 30w, 60w
100V: 15w, 30w, 60w 8 Ω Bypass |
|
Frequency Response
|
70Hz - 19kHz
|
|
Security
|
87 dB
|
|
Weight
|
8 lb each
|
|
Speaker Grille
|
Perforated Steel Grille
|
|
Diameter
|
10.5" (speaker)
|
|
Cutout Diameter
|
8.8
|
|
Sold As
|
Each
|
|
Features
|
Dog Ear Clamping Range: 9-40mm or 28-58mm when dog reversed
|
