Product Description
Key Features
• 8" Polypropylene Woofer, 1.5" Copper voice coil
• 100W RMS @ 8 ohm power output
• 10W (70V only), 20w, 40w, 80w or 8 ohm bypass
• 30Hz - 150Hz Frequency response; 86dB Sensitivity
Episode® 800 Commercial Series 70-Volt In-Ceiling 8" Subwoofer with Tile Bridge
Give your next commercial installation a boost of performance – from a discrete form factor – with the Episode® 800 Commercial Series 70-Volt In-Ceiling Subwoofer. This sub is the perfect complement to our in-ceiling speakers, providing deeper bass, better bottom end, and improved low-frequency performance. Plus, it’s a breeze to install, thanks to an innovative 3-piece tile bridge, front-mounted tap settings, and a removable screw terminal. And for the icing on the cake, everything you need for the install ships together. One subwoofer, one bridge – one box.
Premium ComponentsEquipped with top-of-the-line components, this in-ceiling subwoofer provides that deep, thumping bass and detailed sound customers crave. It features a mica-filled polypropylene woofer for added depth, and an oversized 1.5” copper voice coil. Outstanding driver voicing is combined with a 1st order crossover for sound clarity beyond expectations, while a low-turbulence tube port provides outstanding low-frequency response. |
Fast, Easy InstallationForget about having to play “hide the subwoofer” – this product installs cleanly into the ceiling, right alongside the speakers. A swing-out dog mounting system, security wire tabs, and clamping mounting cover make it simple to secure. Plus, its mounting cover can clamp a conduit and is held in place by captive screws – so you can loosen them without worrying that they’ll fall out. Screw-down dog ears are reversible for double thickness sheetrock, and the intuitive box design doubles as an install shelf. A carry loop makes carrying this speaker up the ladder a breeze. |
|
High-Strength, Thin-Bezel GrilleWe include a white, thin-bezel, high-strength magnetic grille that’s held in place with neo-magnets around the perimeter. Your clients will love the minimalist look of the thin-bezel, and you’ll love how easy the high-strength magnet makes your install. We even include a tether for extra insurance that the grille won’t fall. Black grilles are also available for purchase (not included). |
Innovative Tile Bridge – Ships in the BoxSay goodbye to that big, clunky tile bridge that ships in a huge box and is difficult to position in the ceiling. You can install this speaker tool-less or use the included security screw to key in on a dimple and support the ceiling tile while screwing down the dogs. And of course, we include it in the same box as the speaker…because that just makes sense. |
|
Front-Mounted, Tool-Free Tap SettingsTired of fumbling with hard-to-use selector knobs every time you need to adjust a speaker’s tap setting? This product solves the problem with convenient front-mounted 10w, 20w, 40w, and 80w taps, plus an option for 8-ohm bypass. Using a screwdriver works great for those hard-to-reach installs, but you can also turn the knob with your hand for fast and easy top-of-the-ladder adjustments. |
UL Listed, Plenum RatedThis commercial speaker is UL listed, as well as plenum rated. It’s approved for use above ceilings in air handling and plenum locations – and has passed the stringent standards needed to get the UL stamp of approval. |
|
Smarter PackagingWorking on a commercial jobsite where EPS foam isn’t allowed, or tired of cleaning up huge mounds of trash when the job is over? Our environmentally friendly cardboard packaging cuts down on waste – plus we ship everything you need for the install in one box. |
Specifications
Height
|
12.17"
|
Woofer
|
8" Polypropylene
|
Power Output
|
100 Watts RMS (@ 8 Ω)
|
Nominal Impedance
|
8 Ohms
|
Transformer Tap Settings
|
70V: 10w, 20w, 40w, 80w
100V: 20w, 40w, 80w 8 Ω Bypass |
Frequency Response
|
30Hz - 150Hz
|
Security
|
86 dB
|
Weight
|
6.5kg (15.3 lb) each
|
Speaker Grille
|
Perforated Steel Grille
|
Cutout Diameter
|
11.4
|
Sold As
|
Each
|