Product Description
 |
 |
 |
 |
Key Features
• 8" Custom made LF woofer with rubber surround
• 1.5" HF high-end dome tweeter
• 90° (H) x 90° (V) dispersion
• 55 - 22KHz Frequency response
• 8 x M5 threaded rigging points
• 12mm (0.47") Baltic birch plywood cabinets
• Optional mounting hardware & line transformer 100W
Passive Sound Reinforcement 350W / 8 ohm - 121dB SPL
The loudspeaker shall consist of a 8" low frequency transducer, 1.5" HF dome tweeter; the low frequency driver's voice coil shall be 1.5" in diameter. Performance specifications of a typical unit shall be as follows: usable frequency response shall extend from 55Hz to 22kHz; nominal impedance shall be 8 ohms; the frequency dividing network shall have a crossover frequency of 2 kHz; measured sensitivity shall be at least 92.5dB ( at 1m [3.3ft] ).
The input shall be switchable for use either at nominal 8 ohms or on a 100V distributed speaker line via transformer (optional). The cabinet shall be constructed of 0.47” Baltic birch plywood covered in a scratch & scuff resistant black or white finish. ARCHON speakers shall be installed in suspension by wall bracket, on tripod stand, with adjustable wall support and simple stack installation.
- 1 x 8” (1.5” VC) custom made LF woofer with rubber surround
- 1 x 1.5” HF high-end dome tweeter
- 8 x M5 threaded rigging points
- 2-way, passive sound reinforcement systems
- 12mm (0.47”) baltic birch plywood cabinets
- Custom designed LF woofers, made in Italy
- Custom designed HF dome tweeter, Made in Italy
- Crossover networks equipped with 4 x Euroblock speaker terminals; factory preset for optimal line transformer installation
- Multiple M5 threaded rigging points
- Acoustically transparent steel grille and antidust protection cloth
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 100W
 |
 |
|
| Pole Mounted | Flying Hardware |
Features
-
Stylish architectural cabinet design
-
Acoustically transparent steel grilles with protection cloth
-
High SPL, fast responding dynamics, excellent intelligibility, wide band, extremely low distortion
-
Baltic birch plywood cabinets available in black or white extra texture paint
-
Choice of different RAL paint colours on order
-
Choice of different paint finish: glossy, matt, textured and more, on order
-
Custom designed low frequency woofers, made in Italy
-
Custom designed high frequency compression drivers, made in Italy
-
Rotatable horns for optimal horizontal or vertical sound dispersion angle
-
Selectable bi-amp/full range crossover network
-
Full suspension possibilities through multiple M10 / M5 threaded rigging points and a wide range of mounting hardware
-
Possibility to install line transformers for 100V/70V applications
-
Possibility to order weatherproof versions for outdoor use
-
Possibility to extend low frequencies performance through dedicated and compact subwoofers (Archon 208S, Archon 215S)
Specifications
- CONFIGURATION: 2 way
- RECOMMENDED AMPLIFIER: 350 W RMS
- LONG TERM POWER: 175 W
- SHORT TERM POWER: 700 W
- NOMINAL IMPEDANCE: 8 ohm
- FREQUENCY RESPONSE: 55Hz - 22KHz -6dB
- LOW FREQUENCY WOOFER: 8 - 1.5 coil inch
- HIGH FREQUENCY DRIVER: 1.5 - 1.5 coil dome inch
- SENSITIVITY (@1W/1M): 92.5 dB
- MAXIMUM SPL CONT/PEAK: 118/121 dB
- DISPERSION: 90° HxV
- CROSSOVER FREQUENCY: 2 KHz
- RECOMMENDED HP FILTER: 40hz - 25dboct
- INPUT CONNECTOR: 4 x Euroblock
- NET DIMENSION (WXHXD): 248x411x248 - 9.76x16.18x9.76 mm/inch
- NET WEIGHT: 6.5/14.3 kg/lb
