Product Description
 |
 |
 |
 |
Key Features
• 12" (3" VC) B&C custom made high excursion LF woofer
• 1.4" (2.5" VC) B&C custom made HF compression driver
• FBT rotatable 70° x 50° constant directivity horn
• 55 - 22KHz Frequency response
• 12 x M10 threaded rigging points
• 15mm (0.6") Baltic birch plywood cabinets
• Optional mounting hardware & line transformer 300W
• Full range / bi-amp crossover networks with protection
Passive Sound Reinforcement 1000W / 8 ohm - 133dB SPL
The loudspeaker shall consist of a 12" low frequency transducer, 1.4" HF dome tweeter; the low frequency driver's voice coil shall be 3" in diameter. The loudspeaker shall be setup in full-range mode or bi-amp mode. Performance specifications of a typical unit shall be as follows: usable frequency response shall extend from 50Hz to 18kHz; nominal impedance shall be 8 ohms; the frequency dividing network shall have a crossover frequency of 1.6kHz; measured sensitivity shall be at least 99dB ( at 1m [3.3ft] ).
The input shall be switchable for use either at nominal 8 ohms or on a 100V distributed speaker line via transformer (optional). The HF driver shall be horn loaded to cover 70 degrees horizontal by 50 degrees vertical (rotatable horn). The cabinet shall be constructed of 0.59” Baltic birch plywood covered in a scratch & scuff resistant black or white finish. The enclosure shall be fitted with threaded inserts to allow for a variety of mounting methods.
 |
 |
|
| Pole Mounted | Flying Hardware |
Features
- 1 x 12” (3” VC) B&C custom made high excursion LF woofer
- 1 x 1.4” (2.5” VC) B& C custom made HF compression driver 1 x 1.4”
- FBT rotatable 70° x 50° constant directivity horn
- 2-way, passive sound reinforcement systems
- 15mm (0.6”) baltic birch plywood cabinets
- B&C custom designed high excursion LF woofers
- B&C custom designed HF compression drivers
- Full range / bi-amp crossover networks with protection
- 2 x Neutrik NL-4 speakon connectors
- 1 x 4 Euroblock terminal speaker connector
- 12 x M10 threaded rigging points
- 2 x metal flange threads for U bracket wall mount
- Acoustically transparent steel grille and antidust protection cloth
- Rear pocket handle to ease lifting and installation of the cabinet
- 35mm (1. 3/8”) top hat for speaker stand
- New FBT rotatable logo badge following vertical or horizontal installation
- Optional mounting hardware
- Optional line transformer 300W
Specifications
- CONFIGURATION: 2 way
- RECOMMENDED AMPLIFIER: 1000 W RMS
- LONG TERM POWER: 500 W
- SHORT TERM POWER: 2000 W
- NOMINAL IMPEDANCE: 8 ohm
- FREQUENCY RESPONSE: 50Hz - 18KHz -6dB
- LOW FREQUENCY WOOFER: 12 x 3 coil inch
- HIGH FREQUENCY DRIVER: 1.4 - 2.5 coil dome inch
- SENSITIVITY (@1W/1M): 99 dB
- MAXIMUM SPL CONT/PEAK: 129/133 dB
- DISPERSION: 70°x50° HxV
- CROSSOVER FREQUENCY: 1.6 passive or active Bi-Amp KHz
- RECOMMENDED HP FILTER: 40hz - 24dboct
- RECOMMENDED EXTERNAL FILTER: Digital management with presents
- INPUT CONNECTOR: 2 x speakon NL4 in & thru 4 x Euroblock
- NET DIMENSION (WXHXD): 365x660x380 - 14.37x25.98x14.96 mm/inch
- NET WEIGHT: 22/48.5 kg/lb
