Product Description
 |
 |
 |
 |
Key Features
• 14" LF woofer with 2.5" voice coil
• 1" Exit throat HF compression driver with 1.4" voice coil
• 90° (H) x 60° (V) constant directivity horn
• 45Hz - 20KHz Frequency response
• 700 / 200W Built-in amplifier (LF / HF)
• Stage monitor angling facility with 12°, 40° or 55° taper
• 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate
Processed 2-Way Active Loudspeaker 700W + 200W - 132dB SPL
The FBT JMaxX 114A two way active reinforcement speaker system shall incorporate 1 x 14" LF woofer with 2.5" voice coil and 1" exit throat HF compression driver with 1.4" voice coil coupled to a 90°H x 60°V constant directivity horn. Thanks to the asymmetrical shape also allows use as a stage floor monitor at 12°, 40°, 55°.
The FBT JMaxX 114A shall meet the following performance criteria: frequency response of 45Hz to 20kHz, maximum SPL of 132 dB, 700W RMS + 200W RMS Class D power amplifiers. The FBT JMaxX 114A provides a DSP with 4 factory equalization presets. With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, The FBT JMaxX providing a myriad of possibilities for bands, DJ and solo artists. Afront face steel grille protects the woofer from external damage. The control panel provides XLR/Jack input, XLR link, level, preset switch, HP filter button, line/mic button, two status led (PRT-LIMITER / ON).
The two M10 fly points built into the cabinet, along with the optional mounting bracket, allow the The FBT JMaxX 114A speaker to be surface mounted on walls or ceilings and standard 1.38" speaker stand socket allow the The FBT JMaxX 114A to be mounted on speaker stand.
 |
 |
 |
||
| Hardware For Permanent Installations | Switch Mode Power Supply | Lightweight |
Features
-
14” LF woofer with 2.5” voice coil
-
1’’ exit throat HF compression driver with 1.4” voice coil
-
Frequency response from 45Hz to 20 kHz
-
Extremely lightweight: only 14Kg?
- 2-way, bi-amplified bass reflex design cabinet
- 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply
- DSP with 4-EQ presets
- Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch
- 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate
- 90°H x 60°V constant directivity horn
- Stage monitor angling facility with 12°, 40° or 55° taper
Specifications
- CONFIGURATION: 2 way
- BUILT-IN AMPLIFIER LF/HF: 700/200 W RMS
- FREQUENCY RESPONSE: 45Hz-20kHz-6dB
- LOW FREQUENCY WOOFER: 14 - 2.5 coil
- HIGH FREQUENCY DRIVER: 1 - 1.4 coil
- MAXIMUM SPL CONT/PEAK: 126/132 dB
- DISPERSION: 90°x60°
- INPUT IMPEDANCE: 22k ohm
- INPUT CONNECTOR: XLR with loop, Jack 6.3mm
- POWER CORD: 16.4ft / 5mt
- NET DIMENSION (WXHXD): 402x644x345 15,8x25,4x13,6 mm/inch
- NET WEIGHT: 14 kg
- TRANSPORT DIMENSION (WXHXD): 500x745x440 / 19.7x29.3x17.3 mm/inch
- TRANSPORT WEIGHT: 36.6 lbs / 16.6 kg
