Product Description
 |
 |
 |
 |
Key Features
• 4 x 6.5" woofers with a 1.5" voice coil
• 1 x 1.4" Neodymium compression driver with 2.5" voice coil
• 90° x 20° (HxV) Dispersion
• Class D 800W for LF / 400W for HF amplifier
• Possibility of vertical and horizontal installation
• Cabinet in 12mm (0.47") birch plywood with anti-scratch varnish
Vertical Horizontal Active Line Array
Constructed in 0.47’’ birch plywood with a tough and tour-ready synthetic rubber surround, each VHA406ND comprises four 6.5-inch woofers plus a 1.4’’ large format neodymium compression driver with a 2.5” voice coil.
The purpose-designed central waveguide, optimized with BEM finite element simulators, offers dispersion of 90° horizontal and 20° vertical, with precise and focused vertical control across the enclosure’s entire operating range.
The result is a combination of perfectly balanced, symmetrical dispersion.
The summit of the entire project is the 800+400W RMS amplification module with TCP/IP network interface. Based on the OCA ALLIANCE AES70 standard, the new HORIZON family receives 24-bit 48-96Khz digital audio streaming from all devices compatible with the DANTE standard and communicates with the INFINITO System Management Suite remote control software. The module is contained in an aluminium chassis with intelligent forced ventilation and is equipped with an OLED display with encoder for parameter setting and a high-brightness blue front LED allows remote identification of the device, also in daylight. Fully developed in house by the FBT R&D team, INFINITO is the revolution that enhances the user experience, reaching new heights in terms of performance and simplicity.
- Bi-amplified 2-way line array
- 4 x 165mm (6.5 ") custom woofers with 38mm (1.5") coil
- Large format FBT waveguide with 90° (H) x 20° (V) dispersion
- Frequency response from 65Hz to 20KHz
- Class-D 800Wrms for LF and 400Wrms for HF amplifiers with switch mode power supply
- Network interface TCP/IP - AES70 compatible
- Ethercon RJ45 input and output for daisy-chain
- Remote control by INFINITO System Management Suite
- OLED DISPLAY and encoder with PUSH for easy onboard control
- The front of the loudspeaker is covered with a powder coated perforated steel grille
The VHA406N has the same characteristics of the VHA406ND model but does not include the Dante feature
 |
 |
 |
 |
 |
||||
| Powered By Infinito | Powered By Dante | Hardware For Permanent Installations | Flying Hardware | Neodymium Driver |
Features
Multiple systems can be coupled:
- Full coherence far beyond 18KHz
- Particularly powerful, defined midrange with a frequency response extending from 65Hz to 20KHz.
The VHA406ND Class-D switch mode amplifier module can deliver:
- 800W for the LF section
- 400W for the HF section
Courtesy of an integrated DSP processor, with next generation algorithms, users whilst enjoying the system’s tremendous headroom to ensure the best possible audio fidelity.
Integrated hardware
- Allows the linking of up to six VHA406ND cabinets in vertical array
- With variable angles from 5° to 20° (in 5° steps)
- Ensure of an easy and error-proof system configuration and set-up.
Rigging is simplified even further:
- Inclusion of only one setting point per side.
- All setting pins are fixed and integrated into the hardware
- Elimination of both the risk of loss and damage in transport.
The integrated quick-release anchor points facilitate the creation of horizontal arrays using the dedicated flybar:
- Each flybar will support up to three VHA406A cabinets
- Multiple flybars can be joined for the creation of arrays delivering up to 360° coverage.
The FBT HORIZON VHA406ND provides a wide range of accessories:
- Suspension, pole-mounting or ground-stacking.
- Rain cover that protects the electronic parts from the rain
Specifications
- BUILT-IN AMPLIFIER LF/HF: 800 / 400
- BUILT-IN AMPLIFIER PEAK LF/HF: 1600 / 800
- FREQUENCY RESPONSE: 65Hz - 20kHz
- LOW FREQUENCY WOOFER: 4 x 6,5’’ / 1,5’’ coil
- HIGH FREQUENCY DRIVER: 1 x 1,4’’ / 2,5’’ coil
- MAXIMUM SPL CONT/PEAK: 128 / 133
- DISPERSION: 90°x20°
- INPUT IMPEDANCE: 22
- CROSSOVER FREQUENCY:
- AC POWER REQUIREMENTS: 640 VA
- INPUT CONNECTOR: XLR IN / OUT
- POWER CORD: 5 / 16,4
- NET DIMENSION (WXHXD): 612x360x397
- NET WEIGHT: 68,34lb / 31Kg
- TRANSPORT DIMENSION (WXHXD): 695x440x475 mm / 27.4x17.3x18.7 inch
- TRANSPORT WEIGHT: 72,75lb / 33Kg
Optional Accessories
Call us 
1300 967 244 for configuration & pricing
 |
 |
 |
||
| VHA-F 406 | VHA-FH 406-1 | VHA-FH 406-5 | ||
Flybar For Vertical Configuration
|
Flybar For Horizontal Configuration
|
|
Flybar For Horizontal Configuration
|
 |
 |
 |
||
|
VHA-B 406 |
VHA-S 406 |
VHA-T 406 | ||
|
Metal Base For Array Ground Configuration or Above Subwoofer
|
Bracket For 1 Spkr with Speaker Pole
|
Trolley With Feet Stabilisers
|
|
|
||||
|
VHA-2F406 |
VHA-RC 406 |
VHA-C 406/112 |
||
|
Flybar for VHA406/VHA112 |
Rain Cover For Amplifier Module | Nylon Cover For Cabinet |
