Product Description
 |
 |
 |
 |
 |
Key Features
• Built-in scene activation mechanism
• Security and notification communication classes
• Configuration menu with a diode
• Energy and power measurement of connected devices
• Latest generation Z-Wave 500 series chip & Z-Wave Plus protocol
• Supports secure mode (Z-Wave Network Security) encrypted with AES-128
FIBARO is a wireless smart home automation system, based on the Z-Wave protocol. All of available devices can be controlled through a computer (PC or Mac), smartphone or tablet. Z-Wave devices are not only receivers, but can also repeat the signal, increasing the Z-Wave network’s range. It gives advantage over traditional wireless systems that require direct link between transmitter and receiver, as a result the construction of the building could a ect network’s range negatively.
Every Z-Wave network has its unique identi cation number (home ID). Multiple independent networks can exist in the building without interfering. Transmission security of FIBARO System is comparable to wired systems.
Z-Wave technology is the leading solution in smart home automation. There is a wide range of Z-Wave devices that are mutually compatible, independently of manufacturer. It gives the system the ability to evolve and expand over time.
Features
- Compatible with any Z-Wave or Z-Wave+ Controller,
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
- Advanced microprocessor control,
- Active power and energy metering functionality,
- Works with various types of switches – momentary, toggle, three-way, etc,
- To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
- FIBARO Switch 2 is an extension unit.
Single Switch 2
The remotely operated FIBARO Single Switch 2 is designed to turn electrical devices on and off and to measure their power and energy consumption. The compact size of the device makes it the world's smallest of its type and allows for the product to be installed in wall switch boxes or housings. FIBARO Single Switch 2 can be controlled either via Z-Wave network or with a wall switch through a direct connection.
Double Switch 2
The remotely operated FIBARO Double Switch 2 is designed to turn two electrical devices on and off and to measure their power and energy consumption. The compact size of the device makes it the world's smallest of its type and allows for the product to be installed in wall switch boxes or housings. FIBARO Double Switch 2 can be controlled either via Z-Wave network or with a wall switch through a direct connection.
Specifications
| Model: | Single Switch 2 | Double Switch 2 |
| Power supply: | 100-240 V~ 50/60 Hz | |
| Rated load current: | IEC standards: 8A UL standards: 6.5A, UL standards |
IEC standards: 6.5A per channel, 10A overall UL standards: 6A per channel, 9.5A overall |
| Operational temperature: | 0-35°C | |
| For installation in boxes: | Ø ≥ 50mm, depth ≥ 60mm | |
| Overcurrent protection: | required external 10A circuit breaker | |
| Radio protocol: | Z-Wave (500 series chip) | |
| Radio signal power: | up to 1mW | |
| Radio frequency | 868.4 or 869.8 MHz Eu; 908.4, 908.42 or 916.0 MHz uS; 921.4 or 919.8 MHz AnZ; 869.0 MHz Ru; |
|
| Range: | up to 50 m outdoors up to 40 m indoors (depending on building materials) |
|
| Dimensions (L x W x H) | 42.5 x 38.25 x 20.3 mm | |
| Radio frequency | AU/NZ 921.4Mhz | |
FIBARO Energy Of Modern Life
FIBARO Home Automation System - Everything is Connected
