Product Description
 |
 |
 |
Key Features
• SMP Technology provides the highest level of surge & spike protection
• Multiple units may be daisy chained with bi-directional communications
• SmartSequencing technology allows multiple A/V systems to be powered on/off
• Extreme Voltage Shutdown protect equipment from sustained overvoltage conditions
• Optional RS232 to Ethernet Adapter provides remote control, programming & monitoring
• Linear Filtering Technology ensures maximum performance of connected equipment & reduce AC noise
SmartSequencing With Advanced AC Protection and Noise Filtration
Designed for Commercial A/V Installations in 220V-240V regions, the CN-3600 SE combines robust control capabilities via SmartSequencing™ Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT® Remote Power and Energy Management Platform (BB-RS232 adaptor required, sold separately).
The new CN-3600 SE is one of the first products to feature Furman’s SmartSequencing™ technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by nontechnical personnel. SmartSequencing’s bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring multizone electronic systems are powered on and off safely and dependably from a single control point across an entire installation. Units can be connected via current loop at runs of more than 1,000 feet with backwards compatibility with Furman’s legacy sequencers.
In addition, the CN-3600 SE offers robust control options, equipped with RS-232 ports and command sets for integration with control systems. An optional RS-232-to-Ethernet adaptor (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman’s BlueBOLT®-hosted remote power and energy management platform.
Features
- Surge Protection - Series Multi-Stage Protection (SMP) Technology provides the highest level of surge & spike protection available.
- Noise Filtration - Linear Filtration Technology (LiFT) reduces AC noise linearly across a very wide bandwidth for unequaled audio & video clarity.
- Voltage Protection - Extreme Voltage Shutdown (EVS) circuity safely powers down itself and connected equipment during unsafe voltage periods.
- SmartSequencing™ - SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key.
- Diagnostic Lights - Diagnostic lights provide valuable system information including power quality, “Protectection Ok” indicator, and Extreme Voltage indicator.
- 16 Amp Output Current - 16 amp maximum current capacity with incorporated 16 amp thermal circuit breaker.
- Remote Access (RS-232) - RS-232 compatibility & command set provide integration with control systems, open source and control programming.
- BlueBOLT Compatible® - BlueBOLT provides remote access to reboot components, power equipemnt on/off, and monitor power quality via the internet from anywhere in the world.
- Nine Total Outlets - The CN-3600 SE contains eight rear panel IEC C13 outlets and one front panel IEC C13 outlet.
Specifications
AC Voltage Input Range
- 180-270 VAC, 50/60Hz
Maximum AC Current Rating
- 16 Amps (Thermal breaker)
AC Cord
- 1.5mm 2x3, 2.5m Long, black, IEC C-19 Female to Schuko CEE 7/7 Male Plug
AC Receptacles
- Convenience Outlet (Front Panel) 1 IEC C-13 (Unswitched)
- Rear Panel Outlets: 1 IEC C 13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay)
Surge/Under-Overvoltage Protection
- AC Surge Protection: Series Multi-Stage Protection (SMP)
- Spike Protection Mode: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 375 V peak @ 6,000 volts/3,000 amps Response Time: 1 nanosecond
- Maximum Surge Current: 6,500 Amps
- AC Undervoltage Protection: 175VAC+/-5VAC
- AC Overvoltage Protection: EVS, 275VAC+/-5VAC
- AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)
AC Filtering
- LiFT
- Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz
Operating Temperature Range
- 5C (40F) to 40C (105F) degrees
Humidity Range
- <90% rH (Relative Humidity)
User Interface:
- Key switch: Front panel, 3-position key switch (On, Off, Remote)
- Keys: Included, 1 pair
- Pushbutton Switch: Front panel, hidden by security cover
- Circuit Breaker: Front panel, pushbutton, 16A Thermal Breaker
- Front panel diagnostic indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
- Front Panel DIP Switches: Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
- Potentiometer: Front panel, hidden by security cover, fine tune delay adjust
Control/Status/Triggering (Rear Panel):
- Remote Terminal: +5-30VDC In, 12VDC (10mA) Out
- SmartSequencing: Phoenix-type 4-Pin Connector with Screw Terminals, Primary & Secondary Links (Current Loop - 300 m nominal)
- Remote Terminal: Phoenix-type 4-Pin Connector with Screw Terminals; +12V, STAT, REM, GND
- Force Off/Delay 3 Terminal: Phoenix-type 5-Pin Connector with Screw Terminals, FORCE OFF, DELAY 3
- RS-232 Compatible: Yes, DE-9 Connector
- IP Accessibility: Optional, via BB-RS232 Ethernet/RS-232 Adaptor (sold separately) for direct IP control via Telnet, HTTP, BlueBOLT®
- Voltmeter: Available data via RS-232 or Ethernet option, +/- 2VAC accuracy
- Ammeter: Available data via RS-232 or Ethernet option, +/-1A accuracy
Power Consumption (No Load): 10 Watts
- Safety Agency Mark: CE
- RoHS Compliant: Yes
