Product Description
 |
 |
 |
 |
 |
Key Features
• USB 2.0; Power over Ethernet; KVM Supported
• Stereo audio output 3.5mm with adjustable delay
• Supports HDCP 2.2
• 23 ms ultra low latency
• Instant-Seamless switching
• RS232, IR*, and CEC control of sources
• Encodes a 4K or lower source device into IP & sends over the network
Incorporate Keyboard, Touchscreen and Mouse Control with Optional Dolby Downmixing
The 3G Ultra 718KVM Transmitter supports KVM and stereo audio breakout, along with all the 4K system wide features from the 3G Ultra product line.
The Transmitter is upgradable in the field to provide Dolby Digital downmixing.*
The 718KVM encodes a 4K or lower resolution source device into an IP signal and sends it over the network with ultra-low latency and instant switching; supports HDCP 2.2 and USB 2.0; and features image pull, stereo audio output 3.5mm with adjustable delay, and RS-232, IR, and CEC control of sources.
- Upgradeable add-on will enable:
- Dolby DSP - Re-encode Dolby Digital 5.1 as Dolby Pro Logic II for HDMI distribution to both multi-channel and stereo audio zones
- Two analog audio inputs mixable with HDMI audio
- Add-on not currently available because of a shortage of Dolby chips
Specifications
| Bandwidth | 180 - 500 Mbps | |
| Compliance |
HDCP 2.2 |
|
| Dimensions & Weight |
184 x 30 x 126 mm |
|
| Encryption |
Hardware-Based AES 256-bit |
|
| Operating Temp | 0-60 °C / 32-140 °F | |
| PoE |
10 watts maximum |
|
| Ports |
Gigabit Ethernet |
|
| Power Supply (not included) |
~4.7-23V |
|
|
Supported Audio |
2-channel PCM |
|
* Upgrade available once Dolby chips are in stock
Optional Accessory
Dolby Digital 5.1 Add-on Chip
- Field-serviceable add-on for 718KVM
- Enables a 718KVM to re-encode Dolby Digital 5.1 as Dolby Pro Logic II for HDMI distribution to both multi-channel and stereo audio zones
- Enables two front analog audio inputs mixable with HDMI audio
- 718KVM + DSPKIT = 718AVP
