Product Description
Key Features
• Supports CEC; HDR10; Bi-directional IR & RS-232
• Support for standard 3D stereoscopic signal formats
• Compliancy up to HDCP 2.2 and backward compliant
• De-embedded digital / 2ch analog audio output from HDMI input
• Support for Dolby TrueHD, Dolby Digital Plus, Dolby Atmos, & DTS-HD Master Audio
• Supports signals up to 4096x2160 60Hz@4:2:0 8bit / 30Hz@4:2:2 12bit / 30Hz@4:4:4 8bit
• Extends 4K@30 (4:4:4) signal up to 45m or 1080p up to 76m using KD-CAT6STP1X cabling
KD-X422POA HDBaseT/HDMI (Tx & Rx) Extenders with power over HDBaseT are an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/ UHD 60 (4:2:0) signals up to 150 ft. using Key Digital® KD-CAT6STP1X Super CAT6A Shielded cable, or up to 125 ft. using a single third-party CAT5e/6 cable. 1080p/60, 1920x1200, 3D signals are extended up to 250 ft. via single Key Digital® KD-CAT6STP1X Super CAT6A shielded cable, or up to 230 ft. using a single third- party CAT5e/6 cable.
In addition to HDMI video and audio signals, KD-X422POA carries IR and RS-232 signals for controlling remotely located equipment. Audio de-embed ports on the Tx unit enable external audio connectivity with audio distribution systems and amplifiers.
Features
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- Power Over HDBaseT: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
- Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog L/R Balanced/Unbalanced and Digital Coaxial Audio (PCM) audio outputs to enable external audio connectivity with audio distribution systems and amplifiers
- Signal Extension:
- Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
- Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6 UTP/STP cabling
- Up to 250 ft. @ 1080p / 1920x1200 using KD-CAT6STP1X cabling
- Up to 230 ft. @ 1080p / 1920x1200 using third-party CAT5e/6 cabling
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
- HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
- 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit
- Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
- 3D: Support for standard 3D stereoscopic signal formats
- HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
- EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
- Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
- Low Profile: Super slim chassis design
- IR Sensor: Sensor powering via +5V on Tx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
- Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
- CEC Support: For inter-device control between input and output HDMI channel
- I2C Communication: EDID and HDCP authentication to Display and Source
- Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
Specifications
- Regulation: CE, RoHS, WEEE
- Enclosure: Black Metal
- Product (Each): 5” x 4.06” x 1.06”, Weight: 0.5 lbs
- Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector
- Accessories: (2) Mounting brackets, (1) IR emitter, (1) IR sensor, (1) 6 pin terminal plug, (2) 3 pin terminal plug