Product Description
 |
 |
 |
 |
 |
Key Features
• Fully standard and compliant SDVoE codec
• Video wall and multiview support
• USB over IP
• Max resolution — 4K@60Hz (4:4:4)
• User configured as encoder or decoder
Zero Latency 4K HDR SDVoE Video Streaming Transceiver over Fiber Optic
KDS−8F is a high−performance, zero latency, 4K@60Hz (4:4:4) video streaming transceiver for streaming via Ethernet over single−mode and multi−mode optical fiber. KDS−8F can be set as either an encoder or decoder. As an encoder, it encodes and streams the HDMI or DisplayPort input along with IR, RS−232, analog audio and USB, over an IP network. As a decoder, it receives the encoded signal and decodes it for output.
- High–Performance Video Streaming Transceiver — Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface, providing lossless compression.
- Maximum Compatibility — Fully standard and compliant SDVoE™ codec, enables compatibility with other software and hardware streaming platforms.
- HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support.
- High–Speed 10G Network Switch — Managed switch provides multicast, jumbo frames, IGMP snooping and fast leave.
- Analog Audio Embedding — Provides an unbalanced analog audio port for embedding audio into the streaming signal.
- Bi–directional USB over IP.
- Bi–directional IR and RS–232 over IP — Control an IR or serial device located on the decoder side from the encoder and vice versa.
- Video Wall Support.
- Multiview Support.
- Easy, Cost–Effective Maintenance — LED indicators for main power, Tx/Rx mode setting, HDMI/ DisplayPort video source detection, USB connection and Tx and Rx transmission enable easy local maintenance and troubleshooting.
- Simple System Management — Remote system management support to enable quick and efficient remote system and device life–cycle management.
Applications
- Medical facilities and hospitals
- Government facilities
- Live entertainment
- Control centers
- Large scale matrixes
Specifications
INPUTS
- 1 HDMI: On a female HDMI connector
- 1 DisplayPort: On a female DisplayPort connector
- 1 IR: On a 3.5mm mini jack
- 1 HDMI: On a female HDMI connector
- 1 IR: On a 3.5mm mini jack
- 1 SFP+ Fiber: On LC connector(s) for 10GbE Ethernet (MM SFP+ transceiver module included)
- 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
- 1 1GbE Ethernet: On an R–J45 connector
- 1 RS-232: On a 3–pin terminal block connector
- 3 USB: On female USB type–A connectors
- 1 USB: On a USB mini connector
- Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0,
- Signal Compression: Ultra–light compression, lossless for most content
- Maximum Range in Point–To–Point Mode: Using OM3 multi–mode fiber — 300m (980ft) / Using OM4 multi–mode fiber — 550m (1800ft) / Using single–mode fiber — 30km (18.6 miles)
- Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources
- Source: 12V DC
- Consumption: 1A
- Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
- Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
- Humidity: 10% to 90%, non–condensing
- 20.00cm x 23.10cm x 2.50cm (7.87" x 9.09" x 0.98" ) W, D, H
- 1.9kg (4.2lbs) approx.
- 38.20cm x 20.00cm x 7.00cm (15.04" x 7.87" x 2.76" ) W, D, H
- 1.6kg (3.4lbs) approx.
What's In The Box
- Kramer Transceiver
- Multimode SFP+ transceiver module
- Rubber feet
- Power adapter
- Quick start guide
