Product Description
 |
 |
 |
 |
MTR150 ZONE 2/ ZONE 3 100V Converter
Put simply, the MTR-150 converts your amplifiers speaker output to a 100V line.
Features
- Housed in a rugged 1U metal chassis rack mount design
- Internally mounted constant votage transformer
- Selectable output mode between 70V/100V output and 8Ohm Output
- Signal in, stereo out, 70V/100V out LED indicators
- Input and output PTC over current protection
- Input RF filter osillation protection
- Rated input power: 50W stereo per channel @ 8 Ohm, 150W Bridge, mono 70V/100V output
- THD+N:0.1% @ rated power
Today most receivers are equipped with 7 amplifiers (7.1ch). 5 amplifiers and a subwoofer (.1ch) output are designated to the home theatre room. That leaves 2 channels to your second zone.
Often Zone2 and Zone3 outputs are restricted, such as:
- Low impedance outputs
- This results in shorter run cabling (less than 30m)
- Cabling is expensive for most mid-range jobs
- Output is in stereo
- This means speakers have to be positioned to the left and right of the listener
We developed the MTR-150 as the solution to these Zone2/Zone3 issues. It converts the speaker output to 100V line allowing for:
- Massive cable runs (100+ meters)
- Daisy chain cabling
- A cost-effective and easy solution
- Mono output
- Negating the need to position speakers on the left andright side of the listener.
- No power required
- The large torodial transformer draws the necessary powerfrom your audio source.
