Product Description
 |
 |
 |
 |
Key Features
• 2 x 120W RMS per channel
• Stereo into 4-8 ohm loads
• 240W output for 70/100V in Bridge mode (direct drive)
• Trigger could be external remote ON/OFF
• Selection for Power-Up mode
• Short circuit & overheating protection
Ideal for Stores, Restaurants, Shopping Mall, Community, School, etc
Features
- Two Channels Model – 120W RMS/Per Channel
- Stereo into 4-8 Ohm loads.
- Bridged mode 240W output for 70V or 100V
- Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
- RED LED (Front Panel) to indicated Standby mode is active.
- Terminal Block analog audio inputs.
- Selection for Power-Up mode.
- Switch for High Pass Filter.
- Natural cooling without Fan.
- TRIGGER could be external remote ON/OFF.
- Short circuit protection.
- Overheating protection.
Specifications
- Output Power:
- 120W x 2, 8Ω (31 V) RMS output, per channel @ < 1 % THD+N
- 120W x 2, 4Ω (22 V) RMS output, per channel @ < 1 % THD+N
- Bridged Outputs For 70V/100V (Switch at “HIZ” position)
- 240W, 70V @ < 1 % THD+N
- 240W, 100V @ < 1 % THD+N
- Frequency Response: 20Hz~20KHz, +/- 2 dB @ 4ΩLoad
- S/N: >90dB @ 1W(20Hz~20KHz)
- Input Sensitivity: 1.0V (+0dBu) @ Max Output 4Ω
- Input Impedance: >10K, Balanced.
- Max. Input Level: 12.3V (+24 dBu)
- Trigger In/Out: DC 12V
- High Pass Filter: 80Hz(±2dB)
- Input Connector: 5 pin Euro terminal
- Trigger Connectors: 3.5 mm Jacks
- Output Connectors:
- 4 pin Euro terminal (4Ω/8Ω)
- 2 pin Euro terminal (70V/100V)
- Power Requirements: AC 100V~240V, 50/ 60 Hz
- Power Consumption: 350W
- Dimensions: 214mm x 44mm x 249.8mm (WxHxD)
- Weight: 1.94 Kg
