Product Description
 |
 |
 |
 |
Key Features
• 2 x 120W @4 / 8 Ohm or 240W @ 8 ohm (Bridged)
• Class D circuit design in compact size
• Built-in DSP with Ethernet interface
• Trigger could be external remote ON/OFF
• Selection for Power-Up mode (on/auto/trigger)
• Short circuit, overcurrent, overvoltage & overheating protection
The PLA2FX power amplifier is designed for providing powerful output to speakers used in stereo sound system, 2.1 home theaters, gaming media system and other listening applications. With Class-D output circuitry, a switching mode power supply offers high efficiency and excellent performance.
PLA2FX can be used as a two channels, 2.1 channels, bridged as a 1 channel amplifier. With LPF switch, it also could be used as a subwoofer amplifier. Built-in DSP (Digital Signal processing) microprocessor to adjust the audio input signal digitally for any kind of speakers and music. Therefore, with the compact size and extremely flexible of amplifier, PLA2FX can be used in many different applications.
Features
- Output power: 120W x 2 (@4 / 8 Ohm) or 240W @ 8 ohm (Bridged)
- Class D circuit design in compact size
- Built-in DSP with Ethernet interface
- RCA analog audio inputs.
- Audio RCA PRE-OUT connector to additional amplifier
- Low Pass Filter (LPF) switch sets the amplifier as a subwoofer amplifier.
- Speaker output binding post connectors
- Selection for Power-Up mode (ON/AUTO/TRIGGER)
- TRIGGER IN/OUT could be external remote ON/OFF
- Natural cooling without Fan.
- Activated standby mode active after 15 minutes of no signal detected.
- Red LED (Front Panel) to indicated Standby mode is active.
- Protection: Short circuit, Overheating, Overvoltage, Overcurrent
Specifications
- Stereo Output:
- 120W x 2, 8Ω
- 120W x 2, 4Ω
- Bridged Output: 240W
- Frequency Response: 20Hz~20KHz, +/- 2 dB @ 4Ω Load
- Low Pass Filter: 150Hz
- Signal to Noise: >90dB A WTD
- THD: <0.05%
- Input Sensitivity: 500m V (-4 dBu)
- Gain Value: 36dB @ 8Ω
- Input Impedance: >10K, unbalanced
- Max. Input Level: 2.5V (+10 dBu)
- Trigger In/Out: DC 12V
- Input Connectors: RCA jack
- Trigger Connectors: 3.5 mm Jacks
- Output Connectors: binding posts, RCA (Pre-Out)
- Power Requirements: AC 100V~240V, 50-60 Hz
- Power Consumption: 350W
- Standby Power Consumption: < 3.0W
- Dimensions: 214mm x 44mm x 249.8mm (WxHxD)
- Weight: 1.9 Kg
