Netgear M4500-48XF8C 48x10G/25G SFP28 Fully Managed Switch with 8x100G QSFP28

Product Description

48-port 10/25G SFP28 Managed Switch with 8x100G QSFP28

These switches combine the configurability of a matrix switcher with the power and scalability of Ethernet to support hundreds of AV over IP endpoints. M4300 and M4500 switches offer IGMP Plus and greatly simplify system architectures at a dramatically lower price point.

Built For AV Over IP

• Pre-configured for out-of-the-box use - NETGEAR IGMP Plus™ enables instant multicast functionality for most AV over IP installations
• Cost effective aggregation - Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies
• Simplified system architecture - Optimized for "Spine and Leaf" redundant AV installations, with or without MLAG between spine switches
• High capacity for AV over IP streams - Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture
• VLAN configuration flexibility - IGMP Plus is default on VLAN 1 out of the box and can be configured on another VLAN for automatic IGMP across switches on that VLAN
• Power and fan redundancy - 2 power supply units (APS750W) and 6 redundant fan trays (AFT402) pre-installed for 1 1 power and 4 2 fan redundancy
• ADVANCED FUNCTIONS
• Advanced Layer 3 features - Includes IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite
• Link Dependency - Ability to enable or disable ports based on the link state of different ports for complete link dependency
• Configuration update simplicity - Non-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features
• Extensive management capabilities - Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
• OOB and CLI - Service port for out-of-band 1 Gigabit Ethernet management (OOB) with industry standard command line interface (CLI) only
• Local management console - Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised)
• SOFTWARE FEATURES
• Secure operation - Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP)
• Fault tolerance - Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling
• Robust link aggregation - Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG)
• Comprehensive routing - IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR, VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite
• Security & Prioritization - Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization
• Multicast routing - High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol

Features

• The M4500-48XF8C switch provides 48-port SFP28 (25G, 10G and 1G fiber)
• And it also provides 8-port QSFP28 (100G, 50G and 40G fiber)
• SFP28 ports are preconfigured for 10G, QSFP28 ports for 100G
• 4Tbps non-blocking fabric for 48 x 25G and 8 x 100G bi-directional
• Two modular power supplies APS750W are pre-installed for 1 1 redundancy
• Six modular fan trays AFT402 are pre-installed for 4 2 redundancy
• Rack mountable - front and back
• Out-of-band 1G Ethernet Management port
• RJ45 RS232 console port and USB storage port
• L2/L3/L4 rich services for AV over IP (certified SDVoE-ready)
• Enhanced IGMP Plus for plug & play L2 Multicast between M4300/M4500 switches
• Line-rate spine and leaf with M4500-32C (32-port QSFP28)
• Static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM-SM/SSM
• 68dB @25°C / 77°F
• Front to back airflow

Specifications

• Acoustics: 68.0dB @ 25°C (77°F) - the noise is reduced when the two PSUs connect to a power source
• Power Consumption (Max): 394 Watts
• 25G SFP28 Ports: 48 SFP28 ports (1x10G default mode, other modes can be 1x25G and 1x10G)
• 100G QSFP28 Ports: 8 QSFP28 ports (1x100G default mode, other modes can be 1x50G, 1x40G)
• PSU and Fans: 2 modular Power Supply Units and 6 modular Fan Trays come pre-installed
• Management: CLI only (local console, telnet port 1223 and SSH port 1234)
• Management Ports: 1G Ethernet service port for out-of-band management (OOB, RJ45)
• RS232 straight-through serial RJ45 for local management console
• Form Factor: Full width 1U (508mm depth) with two mounting ears (front) and rail kits (back)

What's In The Box

• Switch with two power supplies APS750W and six fan trays AFT402 already installed
• Console cable with one DB9 female connector and one RJ-45 serial connector
• Power cord(s)
• Two mounting ears and screws for rack mounting (front)
• One set of rail kits for rack mounting (back)
• Installation guide