Noyafa HDMI Cable Tester

Product Description

The HDMI Cable Tester is designed for the HDMI installations. This portable device allows installers to quickly test, troubleshoot and verify HDMI cables. It is designed to test wire circuit state of HDMI cables with TypeA & C connectors conforming to all HDMI specifications up to version 2.0. Equipped with 2 test modes: fast and slowscan, to identify the cable short, open and crossed status. Includes protective carry bag.

The main differences between NF-622 and NF-611:

• There is no loopback HDMI A socket on the NF-611, so all the HDMI tests require to use of the master unit and remote unit.
• There are no Pass/Open/Cross/Short led lights on the master unit of NF611.

Specifications

• Cable Tested: HDMI cables with Type A & C connectors conforming to 1.1, 1.2, 1.2a, 1.3, 1.3a, 1.3b, 1.3c, 1.4, 1.4a Category 1 and Category 2 cables
• Support test (main unit and remote unit): 19 pin-to-pin wire map and shielding detection
• Test interface of Master unit:
• HDMI (type A)
• Mini HDMI (type C)
• Test interface of Remote unit:
• HDMI (type A)
• Mini HDMI (type C)
• Test Cable length: ≤ 50 metres
• Test Mode:
• Automatically fast scan
• Automatically slow scan/sweep
• Displays: 19 LEDs and shield LED on both main and remote unit
• Result indication: Beep sound
• Low battery indication: Under 6V
• Power source: 9V battery (included)
• Operating temperature: 0 to 40°C <80% RH
• Storage temperature: -10 to 50 °C < 70% RH
• Dimensions main unit: 103*66*27mm
• Dimensions remote unit: 103*35*27mm

* Specifications are subject to change without notice.