Product Description
Key Features
• 50W (4 ohm) / 35W (8 ohm) RMS Continuous power output
• 90W per channel RMS @ 8 ohm Bridged power output
• 20 Hz to 20k Hz Frequency response
• Flexible Power-on: Signal Sensing, and 12v trigger
• Built-in thermal overload and short-circuits protection
• High power efficiency & thermal reduction of Class-D amplifier
Amplifier Overview
Origin Acoustics is the team that invented the architectural loudspeaker speaker category over thirty years ago. Today that same team is producing the finest in-ceiling and in-wall speakers available. These speakers represent patented, state-of-the-art technology that has resulted in unparalleled sound quality that blends seamlessly into any décor.
An amplifier should be transparent, it should literally be just wire with gain. At Origin we pride ourselves in offering no- compromise amplifiers to drive our loudspeakers. Whether you require a stereo or multi-channel version, our amplifiers feature high-efficiency, Class-D power that is built to last and will reproduce every nuance of every recording.
A2150 - Two Channel, Stereo Amplifier
At 150 watts of power for the A2150 and 50 watts for the A1250, plus the ability to consistently drive a 4-ohm load, this is a workhorse that can be used as a building block in any system. Its automation and protection circuits serve to make it perfect choice for home theater or multi-room/multi-zone applications.
Class-D Power
This switching type amplifier class has incredible efficiency, above 90%, as higher power is demanded. This means substantially less heat is produced even though the amplifier is able to produce substantial power. This also means a reduction in size as smaller heat sinks are required and the electronic circuitry can be more compact and reside in a smaller chassis.
Bridgeable Circuit
Bridging two channels into one drives almost triple the power into a single output. This feature creates greater flexibility in system design when additional power is a requirement.
Automation
Origin amplifiers can be place in a rack or inside furniture and require no direct access to function. They are turned on out of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of components. They also have a 12-volt output to trigger other components as necessary.
Protection
Built-in circuits that sense both thermal overload or a short-circuit in the speaker connections, will shut down the amplifier until the temperature level returns to normal operating levels or the short in the connections is corrected. This protects the amplifier from permanent damage and avoids costly service visits and repairs.
Specifications
Model | A2150 | A1250 |
Continuous Power Output (AllChannels) | 150 watts RMS at 4ohms, 95 watts RMS at 8 ohms | 50 watts RMS at 4 ohms, 35 watts RMS at 8 ohms |
Bridged Power Output (AllChannels) | 280 Watts per channel RMS at 8ohms | 90 Watts perc hannel RMS at 8 ohms |
Input Sensitivity | 1000 mV | 1000 mV |
Input Impedance | 20,000 ohms | 20,000 ohms |
AUTOON (AudioSense) Sensitivity | 2.5mV | 2.5mV |
12 Volt Trigger Input | 12V DC; 10K Ohms | 12V DC; 10K Ohms |
12 Volt Trigger Output | 12V DC; 10 mA | 12V DC; 10 mA |
S/N ratio | 95dB | 95dB |
Frequency Response | 20Hz to 20kHz | 20 Hz to 20 kHz |
Distortion (Un-bridged) | 0.1% THD 20Hz - 20kHz | 0.1% THD 20Hz - 20kHz |
Distortion (Bridged) | 0.1% THD 20Hz - 20kHz | 0.1% THD 20Hz - 20kHz |
Input Voltage | 115V AC / 230V AC | 115V AC/ 230V AC |
Fuse (115V AC) | T4AL 250V | T8AL 250V |
Fuse (230V AC) | T2.5AL 250V | T4AL 250V |
Dimensions | 17.7” W x 3.5” H x 13.4” D (450 W x 89 H x 340 D mm) | |
Weight | 13.1 lb (5.94 kg) | 14.8lbs.(6.7kg) |
Certification | Meets FCC Part 15, ETL Listed and tested under UL/EN60065 |