Product Description
 |
 |
 |
 |
Key Features
• 3 Australian sockets & 5 x 10 Amp IEC
• Programmable power management outlets
• Built-in boost and buck AVR
• Hot swappable battery design
• Emergency Power Off Function (EPO)
• Intelligent Slot to accommodate an optional SNMP card
• Free NetGuard software provides complete power monitoring via USB
PowerShield Commander RT 2000VA
With pure sine wave output, the Commander Rackmount Tower guarantees compatibility for all kinds of loads. It’s perfect power protection for versatile applications such as networking, telecom and other mission-critical applications.
The ECO mode function allows cost-effective operation of UPS Systems as high as 98%. In this operation mode, load is supplied by the mains. In the event of a mains failure, the inverter takes over the load and provides supply continuity to the connected systems.
Visit the PowerShield UPS Sizing Guide. which will help you select the correct UPS for your power protection needs.
Features
- Pure sine wave output
- Rack/Tower design
- Built-in boost and buck AVR
- Output power factor 0.9
- Programmable power management outlets
- ECO mode operation for energy saving (ECO)
- Emergency Power Off Function (EPO)
- Hot-swappable battery design
- Long-run models available
- PowerShield NetGuard® software included
- Multiple communication available
- USB port
- RS-232 port
- SNMP slot (option)
- AS400 card (option)
Specifications
Commander RT |
||||
| MODEL | COMMANDER RT 1100 | COMMANDER RT 2000 | COMMANDER RT 3000 | |
| Model Number | PSCRT1100 | PSCRT2000 | PSCRT3000 | |
| Capacity | 1100VA/990W | 2000VA/1800W | 3000VA/2700W | |
| Topology | Line Interactive, Pure Sine Wave | |||
INPUT |
||||
| Voltage | 240Vac (Nominal) | |||
| Voltage Range | 162-290Vac | |||
| Frequency Range | 50/60 Hz (Auto Sensing) ±5Hz | |||
OUTPUT |
||||
| Output Voltage (AC Mode) | 240Vac (Selectable200/208/220/230Vac) ±10% AVR | |||
| Voltage Regulation (Batt. Mode) | ±3% | |||
| Frequency Range (Batt. Mode) | 50Hz or 60Hz ± 1Hz | |||
| Current Crest Ratio | 3:1 | |||
| Transfer Time | 6ms (Typical) | |||
| Waveform (Batt. Mode) | Pure Sine Wave | |||
| IEC Outlets | 10A, C13 x 5 | 10A, C13 x 5 15A, C19 x 1 | ||
| Australian Sockets | 3 | 2 | ||
EFFICIENCY |
||||
| ECO Mode (Advanced) | 98% | 98% | 98% | |
| Battery Mode | 90% | 91% | 92% | |
BATTERY |
||||
| StandardModel | Battery Type &Number | 12V*9Ah (x 2) | 12V*9Ah (x 4) | 12V*9Ah (x 6) |
| Typical Recharge Time | 4 Hours Recover to 90% Capacity | |||
| Additional Battery Banks | N/A | PSCRTBB8 (x1) | PSCRTBB12 (x1) | |
PROTECTION |
||||
| Full Protection | Overload, discharge, thermal, short circuit and overcharge protection | |||
| Surge Protection | 1560Joules / 32500Amps | |||
COMMUNCATIONS & MANAGEMENT |
||||
| Interface | USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact | |||
| Software | PowerShield ®NetGuard ®software supports Windows®, Linux, Unix, and MAC | |||
| HID | Supports Windows, Apple, Linux, NAS and various industrial controllers | |||
| LCD Display/Alarm | AC mode, Batt. mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Low Batt., Batt. Timeremaining | |||
| Audible Alarm | Battery mode, low battery (batt. mode), fault, oveload | |||
PHYSICAL |
||||
| Dimension (D x W x H) | (380 x 438 x 88)mm | (480 x 438 x 88)mm | (600 x 438 x 88)mm | |
| Weight (Net/Gross) | (15kg / 16kg) | (23kg / 25kg) | (32kg / 35kg) | |
OPERATING environment |
||||
| Temparature | 0 - 40°C | |||
| Humidity | 0 - 90% (RH Non-condensing) | |||
| Noise Level | < 45dB | |||
COMPLIANCE |
||||
| Safety | EN62040 - 1 - 1 2003, IEC60950 - 1 - 1 | |||
| EMC | EN62040 - 2 2006 | |||
| RoHS | Directive 2011 / 65 / EU | |||
* Specifications are subject to change without notice.
Optional Accessories
