Product Description
Key Features
• Sonic upgrade for MC cartridges
• 1:16 transformer ratio
• Mu-metal transformer shield
• Dual-mono design principle
• High channel separation
• Solid aluminium chassis shields RF/EMI
• Input impedance matching (10 or 100 ohms)
• Fully passive transformer (no power supply!)
Step-up transformer for MC cartridges
SOUND UPGRADE FOR YOUR MC CARTRIDGEThe output level of MC cartridges is very low, compared to a MM (Moving Magnet) one it is about 10x lower, which means, you need a special phono amplifier. A higher gain is needed to utilize the signals, which can result in a higher noise level and distortion. The MC Step Up Box S3 is the solution. |
|
We always recommend a step-up transformer in combination with a high quality MM phono (especially tube) preamp, rather than MC phono preamplifiers.
|
|
Lively, dynamic & naturalThe MC Step Up Box S3 works very differently compared to a phono preamplifier. The windings ratio of the transformer determines the gain factor. As it works completely passive and no external power is needed, no extra power can be produced. The increase in voltage is achieved by a coresponding decrease is current. As there is no amplification, the MC Step Up Box S3 has a remarkable noise performance and a very low level of distortion. The sound with a Step-Up Transformer will be more lively, dynamic and natural. |
Gold platedPremium RCA terminals Gold plated in- and output RCA terminals for optimum signal transmission. |
AluminiumSolid full aluminium housing Due to the timeless design & rigid aluminium casework, the MC Step Up Box S3 is built for eternity. |
ImpedanceCartridge impedance setting Cartridge impedance matching button on the back. Two different settings available: 10-40Ω & 40-150Ω |
Made in EU
High-quality materials
The new Step Up Box S3 is carefully designed and handmade in Europe.
Specifications
Frequency response 10Hz - 55kHz: | +/- 1dB |
Gain at 10-40 Ohm: | 21dB at 1kHz |
Transformation ratio: | 1:16 |
Gain at 40-150 Ohm: | 24dB at 1kHz |
Recommended load: | 47 kOhm / 100pF |
Input MC: | 1x pair RCA phono sockets |
Output: | 1x pair RCA phono sockets |
Dimensions WxHxD: | 206 x 65 x 153 (164 with sockets) mm |
Weight: | 940g |