Redback 3 Relay, 2 Serial Control Hub With PIR Trigger

Product Description

Designed to be used in conjunction with Redback Touch programmable touchscreen wallplates, this control hub enables the control of a variety of devices. Connection to the wallplate is via Cat5/6 cable up to 50m away. All commands from the programmed plate are then transported to this hub and the appropriate command signal being either serial (RS232/485 or both), IR or relay is then output to the corresponding pluggable terminals. Combined with the wallplate this could be used for controlling an AV system in a classroom, lecture theatre, board room etc.

The serial outputs could be used to control a projector and amplifier, the IR for controlling a set top box and relays for motorised projector screen, lighting etc. A passive infra red (PIR) detector input allows for motion activation of devices, such as when people enter the room. Requires 24V DC power which in turn powers the wallplate.

Size: 66W x 131W x 29H inc flanges.

Specifications

Input Connectors

• Power connection (24V DC): 2.1mm DC socket, Euroblock terminal
• Data: RJ45 8P8C

Output Connectors

• Relay (1-3) Switched Out: Screw Terminals
• NOTE: Relays rated for low power, typical 24V DC switching
• IR Out: Screw Terminals
• Serial Out (RS232 & RS485): Screw Terminals

Mechanical

• Dimensions: 90W x 131D x 30H
• Current Draw: 50mA (idle) 150mA (Max)
• Weight: 0.18kg

* Specifications are subject to change without notice.

Optional Accessory

24V DC 1A Power Supply Adapter

• Input Range: 100V to 240V AC
• Output Voltage: 24V DC
• Output Current: 1A
• Barrel length: 10mm
• Plug tip type: 5.5mm outer diameter and 2.1mm inside diameter
• Polarity: Positive centre
• Cable length: 1.2m
• MEPS efficiency level: V
• Australian standards compliant
• Suitable for a range of electronic devices
• Compatible with Australian mains power point