Product Description
 |
 |
 |
 |
 |
Key Features
• 4 Mic / line inputs & 4 Switched RCA AUX input channels
• Individual level, bass and treble control on all inputs
• Tape out (Dual RCA); Balanced Output (XLR male)
• Adjustable Vox sensitivity on inputs 1-4
• PTT Input and 24V PTT output (limited to 120mA) on inputs 1-4
• MicroSD card based Alert/Evac/Chime/Voice-over module (In built)
• Five sets of closing contacts for message triggering (Alert/Evac/Ch1/Ch2/Cancel)
Designed in conjunction with pro-sound contractors, the A 4432 is a stand alone 8 input mixer with 5 channels which provides a flexible way to bring multiple audio sources together. It combines many of the best features from our popular mixer and signal processing range into one compact unit. Inputs 1 to 4 can be configured for either mic or line use. Mic inputs are 5 pin euro block including PTT contacts. Line level is via RCA. Input 5 consists of 4 line level RCAs which are selectable from the front panel. With the addition of the selection wallplate, input 5 sources can be selected and adjusted remotely. A local input plate (A4931) can be connected to the selection wallplate (A4433) offering additional flexibility within the zone. Inputs from A4931 will automatically mute input 5 sources.
Tone Generator Operation
Tones, chimes and pre-recorded messages are played from the micro SD card which plugs into the rear panel of the mixer. Individual level controls are provided for alert/evac, chime and voice over. All of these can be triggered by closing contacts such as switches, from Fire Indicator Boards (FIB) or any other remote contact source.
Features
- Four Mic/ Line Input channels (Inputs 1-4)
- Four switched RCA AUX Input channels
- Remote AUX source selection, volume and Local input source volume control via optional A 4433 and A 4931 wall plates
- PTT Input and 24V PTT output (limited to 120mA) on inputs 1-4
- Micro SD card based Alert/Evac/Chime/Voice-over module (In built)
- Individual level, bass and treble control on all inputs
- 3.5mm music input overrides AUX 4
- Three levels of priority
- Adjustable Vox sensitivity on inputs 1-4
- Adjustable input sensitivity 1V/100mV on inputs 1-4 and Aux inputs 1-4
- Phantom Power on inputs 1-4
- Tape out (Dual RCA)
- Balanced Output (XLR male)
- Five sets of closing contacts for message triggering (Alert/Evac/Ch1/Ch2/Cancel)
- 24V DC switched output (Limited to 120mA)
- MP3 active indicator
- Signal Present indicator
- LED VU Meter
- 24V DC operation (Plugpack Supplied)
- 24V DC battery back up terminals
Specifications
- Inputs: 4 x mic balanced 600Ω, 4 x Line Stereo 10KΩ, 4 x Line Stereo 10KΩ (switched)
- Output: 600Ω balanced 0dBm
- Distortion: Less than 0.3%
Frequency Response
- Mic: 30Hz-15kHz
- Line: 18Hz-23kHz
- S/N ratio: All controls min. -98dB
- Sensitivity: Mic 2mV, line 100mV/1V
- Phantom power: Nominal 12V DC
Controls
- Mic/line inputs: Bass, treble & volume + master
- Bass/Treble: ±10dB @ 100Hz
Connectors
- Outputs: 3 pin XLR balanced, Stereo RCA
- Mic inputs: Screw terminals
- Line inputs: RCA sockets
- Indicators: MP3 active, signal presence, 6 LED VU meter, power
- Power supply: 24V DC
Mechanical
- Dimensions: 482W x 170D x 44H mm
- Weight: ≈2kg
*Specifications are subject to change without notice.
