Redback A4017 15W PA Amplifier

Product Description

Key Features

Super compact with surprising performance specifications, intended for smaller PA system applications. Our engineering team based the design around a National TDA1519 monolithic IC achieving virtually “destruction proof” operation under quite severe misuse such as over temperature, over voltage, over load and short circuit speaker line conditions.

The amplifier is extremely stable even where microphone (balanced line) and speaker cables are run together for long distances. The unit will automatically shut down when severely overloaded and will restore to normal operation when the fault condition is removed. Suitable as a stand alone desk/bench unit or rack mount with optional hardware. Up to 2 units can be accommodated side by side in 1RU of rack space (44mm high). 12VDC (includes M8936 plugpack) operation makes it well suited for use in tour buses and mobile installations.

Rack Mounting

To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.

Specifications

Power Output

• Power: 15 watts RMS
• Distortion: < 3% @ 1kHz
• Signal to Noise Ratio: Typically > 75dB

Frequency Response

• Mic input: 50Hz - 10kHz, -3dB
• Line input: 50Hz - 15kHz, -3dB

Input Sensitivity:

• Mic: Rear 1.5mV balanced, Front 1.5mV unbalanced
• Line input: 500mV

Output Connectors

• Speakers: Screw terminals
• Output impedance: 4-8Ω

Input Connectors

• Mic : Rear 3 pin XLR balanced, Front 6.35mm jack unbalanced
• Line input: RCA stereo socket, bridged mono
• 12V DC power: 2.1mm socket

Controls

• Mic input: Volume
• Line input: Volume
• Power: On/off switch
• Indicators: Power
• Power supply: 12V DC
• Protection: 3A DC fuse
• Weight: 0.38kg
• Dimensions: 210W x 130D x 44H mm
• Colour: Black

*Specifications are subject to change without notice.