Resi-linx IR over Cat5e IR Target + Junction Box - Foxtel Approved

Product Description

Only Foxtel Approved Receiver Module for use in resi-linx® NEW 'linx-IR' patented Discrete Infra Red system. Advantage of Discrete IR control of specific AV devices from each zone via Dip Switch selection. Easily extendable cable distance by 'Plug and Play' facility using RJ45. Built-in LED's to show acknowledgement of IR commands and Power status. Powered remotely by RL-IR305. Works with IQ3

Features

• Foxtel Approved - works with all Foxtel receivers including IQ2 & IQ3
• Receiver Module for use in resi-linx® NEW ‘linx-IR’ Discrete Infra Red system with RLIR305 (Distribution Module) and RL-IR700 (single) or RL-IR800 (double) Emitter
• Advantage of Discrete IR control of specific AV devices from each zone via Dip Switch selection
• Facility for IR control of local AV device/s by connecting RL-IR700/800 Emitter directly to Receiver Module
• Easily extendable cable distance from Receiver Module by ‘Plug and Play’ facility using RJ45 connector to either Distribution Module or RL-IR170 (IR Distribution Hub)
• Built-in LED to show acknowledgement of IR commands and Power status
• Powered remotely by Distribution Module

Specifications

• Frequency Range: 20 kHz - 200 kHz
• Cable Length Included: 1.75m
• Max. Cable Length: Up to 60 metres
• Max. Target Reception Distance: Up to 10 metres
• Max. Targets per System - inc. RL-IR305: Up to 7 Targets
• Size (mm): body 70 x 40 x 23

In the Box

• Resi-Linx IR505 Receiver Module
• IR Target
• Instruction Sheet