Product Description
 |
 |
 |
 |
Key Features
• 16 x 100 W/Ch @ 4ohm amplifier utilises Cool Power® technology
• Bridgeable audio outputs for increasing power to 200W per channel
• Easily expands the RTI AD-4x, AD-8x & AD-16x audio distribution systems
• Compatible with virtually any audio distribution system
• Power control via voltage triggers or audi signal sense
• Voltage trigger pass-through for powering on/off additional amplifiers
• Thermal overload and OC (Overcurrent) monitor indicators protect the amplifier
The CP-16i Audio Amplifier is ideal for discerning listeners who demand the highest quality audio in every room. Capable of delivering 100W of true audiophile-grade sound to 16 channels, the Cool Power amplifier easily expands the reach of any audio distribution system. Engineered to perform as well as it sounds, the CP-16i features highly efficient, Class-D amplification, overload detection and a compact chassis that fits nicely into one rack space.
Perfect for residential and commercial settings, the experience is the same in every room - amazing. Put RTI technology to the test - you’ll never miss a beat.
Features
- Sixteen channel amplifier utilizes Cool Power® technology.
- Power output is 100W per channel at 4 ohms.
- Bridgeable audio outputs for increasing power to 200W per channel.
- Easily expands the RTI AD-4x, AD-8x and AD-16x audio distribution systems.
- Compatible with virtually any audio distribution system.
- Power control via voltage triggers or audio signal sense.
- Signal Sense feature automatically powers the CP-16i on when an audio signal is detected or puts the unit is standby mode when no signal is present.
- Voltage trigger pass-through for powering on/off additional amplifiers.
- Thermal overload and OC (Overcurrent) monitor indicators protect the amplifier.
- Rackmounting requires just 1RU or use included feet for free standing installation.
- Class-D amplifier technology ensures efficient heat dissipation and low power consumption.
Specifications
| AC Input Voltage | 115VAC or 240VAC (Switchable), 230W |
| Main Power Switch | Front Panel On/Off with LED |
| Mounting | Rack mount (1RU) or free standing |
| Dimensions (HxWxD) | 1.7in(44mm) x 17.25in(438mm) x 8.98in(228mm) |
| Weight | 9.0lbs (4.08kg) |
| Signal Sense | Audio input sense, 12V trigger and 3-5V trigger |
| Standby Power Consumption | Less than 0.25W |
| Warranty | Three Years (parts & labor) |
| Audio | |
| Number of Channels | 16 channels in 8 stereo zones: each zone can be bridged |
| Output Power | 100W per ch. in SE, 4Ω (1.0%THD+N, 20 Hz - 20kHz) 200W per ch. in BTL, 8Ω (1.0%THD+N, 20Hz - 20kHz) |
| Amplifier | Gain: (20Hz - 20kHz) 25.8dB ±0.5dB Amplifier Input: Single Ended input - 1 Vrms max Input Voltage without clipping Amplifier Output: Single Ended output stage - GND referenced 28Vp max Output Voltage without clipping |
| THD + N | 1.0%, 4Ω, SE, f=100Hz, Po=1W |
| Dynamic Range | 110dBA SE, 115dBA BTL |
| Idle Niose | 0uV, A-weighted, 20Hz-20kHz |
| Upper Bandwidth, -3dB | 100 kHz, 4Ω, SE 120 kHz, 8Ω, SE |
| Frequency Response | ±0.4dB, 10Hz - 20kHz, all loads |
| Input Impedance | 47K Ω |
| Output Serial Impedance | 30m Ω, f≤1kHz |
| AC Mains Power | |
| AC Mains Power | Universal Mains 100 - 240 VAC, 50 - 60Hz |
| Fuse Rating | T6.3A_H 250V |
| Power Connection | IEC 320 C13 power connector with 3-pole detachable power cord |
| Thermal | |
| Environmental Operating Temperature | +32°F to +113°F (0°C to +45°C) |
| Thermal dissipation | 2 low noise fans mounted in side panels |
| Thermal dissipation heat loss | 0.23 W / 0.8 BTU/hr, standby 40 W / 135.5 BTU/hr, idle, all ch. 100 W / 341 BTU/hr, max output power, all, ch. driven |
* All Specifications subject to change without notice.
