Product Description
Key Features
• Use multiple ESC-2+ modules for virtually unlimited control of serial devices
• Includes two RJ-45-to-DB9 serial adapters
• Reset button allows ESC-2+ to be set back to factory defaults
• Powered by 5VDC power supply included (not PoE device)
• Adds two additional two-way serial ports to an RTI XP series control processor over Ethernet
The ESC-2 Ethernet to Serial Converter provides a convenient way to add two RS-232 ports to an RTI XP series control processor. Wire the ESC-2 to the local Ethernet network with standard cat-5 cable and it will offer full two-way control, as if the device was wired directly to the control processor. Two built-in RJ-45 jacks and the included RJ-45 to DB9 adapters allow efficient cat5 cabling between the ESC-2 and the device being controlled.* This allows full RS-232 control virtually anywhere there is access to an Ethernet network connection.
*NOTE: Cabling from the ESC-2 to the device being controlled is limited to 30-70 feet depending on baud rate and other factors.
Features
- Provides two additional serial ports to an RTI control processor.
- Use multiple ESC-2 modules for virtually unlimited control of serial devices.
- Capable of two-way serial communication.
- Integrates seamlessly into Integration Designer.
- Can be discovered and configured by Integration Designer over Ethernet.
- Easy wiring to devices using cat-5 cable - Includes two RJ-45 to DB9 serial adapters.
Specifications
Power | +5VDC, 1.0A |
Serial (RS-232) Ports | Two, RJ45 |
Includes two RJ-45 to DB9 adapters | |
Ethernet Port | One, RJ-45 |
Enclosure | ABS Plastic |
Mounting | Wall-mount or free standing |
Dimensions (H x W x D) | W/tabs 2.8” (71mm) x 1.8” (45mm) x 1.0” (25mm) |
Operating Temperature | +32°F to +122°F (0°C to +50°C) |
Operating Humidity | 5% to 95% non-condensing |
Weight | 1.7oz (50g) |
Warranty | Three Years (Parts & Labor) |
* All specifications subject to change without notice.