Product Description
 |
 |
 |
 |
Key Features
• Fully programmable 2.8" touchscreen display and twelve hard buttons
• PoE Ethernet and 2-way RS485 / control port
• Integrated mounting wings for easy installation in retrofit installs
• Add CPB1 for standalone operation (great for classroom/meeting room)
• Proximity sensor automatically wakes the unit when approach by the user and ambient light sensor adjusts the brightness
The KX2 in-wall controller has a clean, sleek design with twelve programmable hard buttons and a 2.8" color touchscreen. The hard buttons and graphic interface are fully programmable using RTI's Integration Designer software for full control of electronics throughout the building. A built-in infrared output port allows direct control or get two-way control when used with an RTI XP series control processor. In addition, the unit's integrated 10/100Base-T Ethernet port with Power-over-Ethernet (POE) provides the flexibility to accommodate any installation.
*Feedback requires a compatible two-way RTI control processor.
*Integration Designer software only available to authorized RTI dealers.
Features
- Fully programmable 2.8" touchscreen display and twelve hard buttons.
- QVGA resolution (240w x 320h) TFT LCD to display custom buttons, text and graphics.
- Integrated 10/100Base-T Ethernet port with Power-over-Ethernet.
- IR output drives up to 1000 feet of wire.
- Proximity sensor automatically wakes the unit up when approached by the user and an ambient light sensor adjusts the brightness.
- Integrated mounting wings for easy installation in retrofit installs.
- Fits in a 4"x4" square electrical junction box (See installation guide for important information).**
- Ships with stylish, low-profile white bezel - bezels also available in black and light almond.
- Faceplate and buttons are black with a glossy finish.
- Twelve hard buttons may be interchanged and custom laser engraved using Laser Shark.
- Optional modules/processors for voltage sensing, relays and advanced two-way control.
- USB and Ethernet programming.
Specifications
- Power: +9VDC to +16VDC, 1A max
- Power Management: Adjustable backlight brightness, Ambient light sensor, Proximity sensor
- Touchscreen Display:
- High-brightness color TFT LCD
- QVGA (240w x 320h pixels) with 65K colors
- Integrated high-resolution resistive touchscreen
- Display Size: 2.8" (71mm) diagonal
- Display Backlight: LED Backlit, 200nit
- Infrared Output:
- Through control port, 200mA output
- Drives up to 1000 ft (300 m) of wire
- Ethernet Port: 10/100 Base-T with Power-over-Ethernet
- Audio: Beeper
- Total System Memory: 32MBytes Flash (non-volatile) memory
- Device Capability: Total number of devices is limited only by memory
- Macro Capability:
- Unlimited steps in a single macro
- Total number of macros is limited only by memory
- Macro capability on every button
- Communications: USB programming port
- Enclosure: High-impact molded ABS plastic
- Mounting: Integrated mounting wings, or screws through front bezel
- Front Plate Dimensions (H x W): 4.4 in (112mm) x 4.6 in (117mm)
- Installation Cut-Out (H x W): 3.789 in (96.5mm) x 3.789 in (96.5mm)
- Total Depth in Wall: 1.2 in (31mm) Plus cables
- Operating Temperature: +32°F to +122°F (0°C to +50°C)
- Operating Humidity: 5% to 95% Non-condensing
- Weight: 7.5 oz (212g)
- Warranty: Three Years (Parts & Labor)
* All Specifications subject to change without notice.
** The KX2 uses a standard 4”x 4” electrical junction box. These should be available at most hardware stores or electrical supply stores online (ex. Granger.com).
Optional CMA Kit
- includes Control Port Connecting block & Two viRsa emitters
Control Port Connecting Block
- Provides power for one compatible RTI user interface.
- Two infrared emitter outputs.
- Variable IR output power.
- Allows RTI in-wall controllers to communicate via one-way RS232 to devices without a processor.
- Steel construction.
- 12VDC power supply included.
Specifications
- Power Supply: +12VDC, 1.0A
- Number of IR Output Ports: Two
- Output Ports: 3.5mm jacks Works with industry-standard IR emitters.
- IR Output Drive: 100mA maximum (per port, adjustable)
- Infrared Input: Compatible with industry-standard repeaters and receivers
- RS-232 Port: RJ45 Connection Includes RJ45 to DB9 adapter
- Mounting: Wall-mount or free standing
- Dimensions (W x H x D): 4.0” (102mm) x .3.5” (89mm) x 1.1” (28mm)
- Weight: 8.4 oz. (238g)
- Warranty: Three Year (Parts & Labor)
