Product Description
 |
 |
 |
 |
Key Features
• Detects the on/off status of almost any component
• Input requirements 3-24VDC or 9-30VAC (50Hz min)
• LED light indicates the current power status
• Control cable can be extended up to 152 m
• Power sensing circuit is housed in a compact, rugged ABS enclosure
• Connects to the MPIO (Multi-Purpose I/O) ports of an RTI control processor or expansion modules (ie. PCM-4 Port Control Module)
The VPS-1 Voltage Power Sensor monitors the on and off status of almost any electronic component. It is used to provide power status information to RTI control system such as the XP-6s control processor. When the attached component is powered on, the VPS-1 detects the voltage supplied from the component, an attached power supply, or a third-party power sensor, and sends a signal to the System Interface Module.
Specifications
| Output | Compatible with industry standard IR emitters (Xantech®or compatible) |
| IR Output Drive | 100mA maximum |
| Input Requirements | 3V to 24V DC -or- 9V to 30V P-P AC (50Hz min) |
| Maximum Current Consumption | 0.5mA |
| Control Cable Length | 12 feet (3.7 m) |
| Voltage Sensor Cable Length | 3 feet (.9 m) |
| Dimensions (W x H x D) | 1.75" (44mm) x 3.0" (76mm) x 0.7" (18mm) |
| Operating Temperature | +32°F to +122°F (0°C to +50°C) |
| Operating Humidity | 5% to 95% Non-condensing |
| Warranty | Three Years (Parts & Labor) |
* All specifications subject to change without notice.
