Product Description
 |
 |
 |
 |
 |
Key Features
• 29 in² Bending wave diaphragm 1.75" voice coil - Wave Flex unit
• 191 in² Air pulse diaphragm 6.5" carbon fiber woofer
• 160 watts RMS Power handling; 86dB Sensitivity
• 170° Hemispherical up to 10kHz Dispersion
• 70/100V Tap settings: 7.5W (70V only), 15W, 30W, 60W, 4 Ohm (Bypass)
• Sonance Depth Identification Sensing Calibration (DISC) system
• Sonance CDX provides uniquely smooth off-axis frequency response for greater fidelity and coverage
Sonance Invisible Series Commercial
Invisible Speakers are the pinnacle of the Sonance “Designed to Disappear” strategy. All-new Motion Flex Invisible Series incorporates new breakthroughs in installation and audio quality, and firmly entrenches Sonance as the unrivaled leader in discreet performance audio.
Note: Sound-Isolating Enclosure included
Features
MOTION FLEX TECHNOLOGY
- A suite of advancements in invisible speaker engineering for unparalleled acoustic performance from an invisible speaker
WAVE FLEX DRIVE UNIT
- High-bandwidth midrange and high-frequency transducer that leverage the bending-wave principle, delivering velvety-smooth mids and crystal-clear highs
AIR FLEX WOOFER
- Glass-fiber woofer coupled to an acoustically inert diaphragm to move a pocket of air like a piston for robust and powerful bass
ACOUSTICALLY ISOLATED BAFFLE
- The diaphragm is split into two active areas that are completely isolated to enable ultra-low distortion sonic transparency like never before
CONSTANT DIRECTIVITY CROSSOVER (CDX)
- The proprietary Sonance CDX provides uniquely smooth off-axis frequency response for greaterfidelity and coverage and almost 180° of horizontal and vertical dispersion
SONANCE DEPTH IDENIFICATION SENSING CALIBRATION (DISC) SYSTEM
- Uses a high-accuracy depth gauge and embedded locator discs to measure the thickness of a finish applied over the surface of a Sonance Invisible Speaker, allowing for a consistent finish and performance within specifications every time
Specifications
|
Wave Flex Drive Unit |
29in² (188cm²) bending wave diaphragm 1.75" (44mm) voice coil |
|
Air Flex Woofer |
191in² (1234cm²) air pulse diaphragm 8" (203mm) carbon fiber woofer |
|
Frequency Response |
40Hz–30kHz (±3dB) |
|
Nominal Impedance |
4 ohms |
|
Power Handling (RMS) |
160 watts |
|
Sensitivity (2.83V/1m) |
86dB |
|
Dispersion |
170º hemispherical up to 10kHz |
|
UL Rating |
- |
|
Transformer |
60W w/ Laminated Core Technology |
|
Transformer Taps |
Primary Taps (70V): 7.5W, 15W, 30W, 60W; Primary Taps (100V): 15W, 30W, 60W; 4 Ohm Bypass |
|
Mounting Depth |
3.39" (86mm) |
|
Overload Protection |
Two Independent Self-Resetting Poly Switches, Safety AgencyUL-1480A, UL-2043, CSA-C22.2 No.205, NFPA-70, and NFPA-90A |
|
Dimensions (WxHxD) |
16.10” x 24.13” x 3.86” (409mm x 613mm x 98mm) |
Optional Accessories
DISC Depth Sensing Gauge
- A high-accuracy depth gauge and embedded locator discs to measure the thickness of a finish applied over the surface of a Sonance Invisible Speaker, allowing for a consistent finish and performance within specifications every time.
- Flat-packed, lightweight units designed to be installed into new construction to reserve locations for Sonance Invisible Series speakers and subwoofers during the early stages of construction.
