Product Description
 |
 |
 |
 |
 |
Key Features
• Dual 10" Woven glass fiber cone Woofers
• Low profile design
• Built-in low pass filter (crossover)
• Port can be moved from front to side by swapping the blank plate
• Sonance Laminated Core Technology transformer - Full-fidelity performance in 70V/100V
NEW! Dual 10" Bandpass Subwoofer
The PS-S210SUBT utilizes all-new 2 x 10” (254mm) low profile, high excursion drivers, that were specifically engineered in-house by Sonance for this product. The polyurethane-coated, laminated-plywood enclosure features an extremely shallow design which allows it to be used in a wide range of specialty applications such as under restaurant booths or banquettes (using the included feet), or mounted onto the side of rafters, on walls or under ceilings (with the optional C-bracket).
One of the most unique and versatile features of the PS-S210SUBT is the ability to port either from the front or the side of the enclosure. The installer simply unscrews the port from the front of the cabinet, and then unscrews a blanking plate from the side, and swaps them. This will allow the product to be used in a variety of installation locations, while always ensuring the optimum sonic performance is achieved.
The PS-S210SUBT features Sonance’s Laminated Core Technology transformer (SLCT), delivering full-fidelity performance in either 70V or 100V mode. This, combined with the built-in low pass filter, allows the subwoofer to be driven on the same feed as the other full-range loudspeakers in a system, negating the need for additional amplifier channels and DSP.
Optional C-Bracket
This optional metal C-Bracket is designed to mount the Dual 10" Subwoofer onto surfaces such as rafters or walls.
Supplied with 4 x M10 bolts and washers.
Specifications
| Frequency Range (-10dB): | 34Hz - 155Hz |
| Frequency Range (-3dB): | 44Hz – 132Hz |
| Power Capacity: | 500 Watts Continuous Program Power | 300 Watts Pink Noise |
| Nominal Sensitivity: | 94dB |
| Nominal Coverage: | 180 degrees conical coverage |
| Directivity Factor (Q): | N/A |
| Directivity (DI): | N/A |
| Rated Maximum SPL: | 121dB @ 1 meter (3.3 feet) average, 127dB peak |
| Rated Impedance: | 4 Ohms nominal, 3.7 Ohms minimum |
| Transformer Taps: |
300W, 150W, 75W and (37W @70V) |
| Crossover Point: | 150Hz |
| Overall Dimension: | 9" Height x 33" Width x 13.78" Depth (228mmx 838mm x 350mm) |
| Net Weight: | 61 lbs (27.7kgs) |
| Shipping Weight: | 75.8lbs (33 kgs) |
| Unit of Measure: | Single |
| LF Driver: | Dual 10" (254mm) woven glass fiber cones with Butyl rubber surrounds |
| Input Connectors: | Four pin Euroblock with loop output connections |
| Safety Agency: | None |
| Suspension Point: | 4 x M10 on two sides |
| Cabinet: | Laminated plywood |
| Optional Accessory | C-Bracket with 4 x M10 mounting bolts |
Dimensions
What's In The Box
- Sonance subwoofer
- (1) Euroblock connector
- (4) M10 mounting bolts
- Installation manual
- Rubber feet
